Loading...
HomeMy WebLinkAbout20250907 75 Clinton St Area Variance Installation Details12-FOOT SIMULATED STONE PRIVACY FENCE STEEL I -BEAM INSTALLATION INSTRUCTIONS Finished Fence Height Fence Panels Steel Posts I -Beam Length Past Embedment Concrete Footings Post Finish 12 feet above ground 4'high • e'wide simulated stone panels W4.13 structural steel I -beams 18 feet 6 feet below ground Proposed 10-12 inches diameter. 72 inches deep Decorative slip-on post covers Wl STEEL FBFAM (is bo 01H) 12' ABOVE NE GROUND HUNG 6' BELOW GROUND 101MITER YLAYOUT AND EXCAVATION © INSTALL STEEL I -BEAMS © CONCRETE INSTALLATION 4 _ t Mark the pence line and pacing. Excavate xam locations Position each the excavated W4.13 steelabeam Secure g e each teel is plumb, mb, proper) at required!imat ly 72 inches deep a nfooting vertically in y12 feeated a finished inshedgraving ensuring post is pe .Al properly concrete ola to holes a inches in far ers. es deep and approximately) channels 10 receM1e tgrade. to rand each the adequatelysupported.rtrengthow ore concrete 10-12 inches in diameter sAlign imulate I-beam channels to receive the toreach the required strength before simulated stone panels. installing fence panels. INSTALL SIMULATED STONE PANELS nels vertically, one above the other, finished 12-foot fence height. iT COVERS a Nail Once the panels are installed, slide the decorative post covers over the exposed steel Fbeams to create a finished appearance. FINAL INSPECTION sill Inspect all posts, panels, covers, and connections for proper alignment, secure Installation, and overall appearance.