Loading...
HomeMy WebLinkAbout20240992 140 Grand Demo & Construction Drawings 2024 07 10Approvals 1.Got approval from the Real Estate Committee to keep the middle section of the existing structure where it stands. a.Specifically approved to build 2.1’over the property line for 37’ so long as I build back on the foundation. 2.Got approval from the Zoning Board of Appeals for a Zero variance for the rebuild of middle section,and relief to build the rear section with a 3’setback from the property line. Contents below include: ●Variance for 100%relief from the Zoning Board of Appeals ●Fully executed license agreement from Real Estate Committee to rebuild the middle section where it currently stands (2’over the property line) ●Marked up site survey of proposed building footprint ●Window spec sheet ●Door spec sheet ●Roofing spec sheet ●Exterior cladding spec sheet ●Soffit spec sheet ●Soffit detail ●Window detail ●Column detail (with spec sheets) ●Cornice detail that will be replicated Building Materials 1.For the original section: a.Existing siding will be restored to maintain the historic character (Navajo Beige). b.All windows will be replaced with 6 over 6 Anderson 400-series windows.(Spec Sheet) 2.For the additions: a.Siding and Trim: i.Smooth Hardie Planks (Navajo Beige)will be used for the siding.(Spec Sheet) ii.3.5’-inch Smooth Hardie Trim (white)will wrap all windows.(Spec Sheet) iii.5.5’-inch piece of vertical Smooth Hardie Trim (white)will separate the addition from the main structure. iv.Approximately 6’of the foundation will be exposed - matching the current structure b.Windows: i.Anderson 400-series -planning for these to be one over one but they can be 6 over 6 if that’s the preference. c.Soffit: i.Vented Smooth Hardie Soffit (white).(Spec Sheet) d.Roof: i.Entire structure will be roofed with Timberline HDZ Architectural Shingles (Slate-colored)-but can be any color.(Spec Sheet) ii.Mid-section will be a gable roofline that steps down and runs perpendicular to the original structure. iii.Rear section will be the same height as the middle section and run parallel and offset to the mid section. Architect raised concerns about water runoff if we tried to force a perpendicular gable with the offset. iv.Overhangs are labeled on site footprint document: 1.1’overhang on original structure and rear section 2.8”overhang on mid-section. 3.Rear Addition: a.Single panel-style door (green)with sidelites.(Spec Sheet) b.Cornice return under the roof of the rear section to mimic the original structure c.Crown Moulding (white)to mimic detail in front.(Spec Sheet) OG,4 CITY OF SARATOGA Gage Simpson,Chair Qg A Brad Gallagher,Vice Chair Shafer Gaston t SPRINGS Brendan DaileyCIO ZONING BOARD OF APPEALS Jonah Cohen Otis Maxwell Chris LaPointe r - µ CITY HALL-474 BROADWAY Robert West(Alternate) ccRPo ASE , SARATOGA SPRINGS,NEW YORK 12866 Chris Maslack(Alternate) 518-587-3550 W W W.SARATOGA-SPRINGS.ORG 420240182 IN THE MATTER OF THE APPEAL OF Joseph Snyder 536 Clifton Park Center Road Clifton Park NY 12065 from the determination of the Building Inspector involving the premises at 140 Grand Avenue in the City of Saratoga Springs,New York being tax parcel number 165.66-2-72 on the Assessment Map of said City. The applicant having applied for an area variance under the UDO of said City to permit the renovation and expansion of an existing duplex in the Arts & Cultural District and public notice having been duly given of a hearing on said application held between April 22"d and May 6d', 2024. In consideration of the balance between benefit to the applicants with detriment to the health, safety and welfare of the community, I move that the foll wing area variance for the follo ing amount of relief: Type of Requirement District Proposed Relief requested dimensional requirement Minimum Corner Side Setback 8' 0' 8' (100%) As per the submitted plans or lesser dimensions, be approved for the following reasons: 1. The applicant has demonstrated this benefit cannot be achieved by other means feasible to the applicant. Per the applicant, these plans allow rebuilding an uninhabitable portion of the property while reusing the existing foundation. The board notes that the proposed plans improve the level of compliance by moving a portion of the building inward from the property line. 2. The applicant has demonstrated that granting this variance will not produce an undesirable change in neighborhood character or detriment to the nearby properties. The Board notes other properties on the block have similar reduced setbacks and that the applicant proposes to restore,rather than demolish, a portion of the structure and build the expansion to match the style of the existent structure. The Board further notes that final plans must also be reviewed by the Design Review Board to ensure consistency with the character of the neighborhood. 3. The variance, at 100%,is considered substantial but this is mitigated by the applicant's desire to reuse the existing foundation in their construction plans. 4. The Board finds this variance will not have an adverse physical or environmental effect on the neighborhood. District permeability requirements will be met. 5. The alleged difficulty is self-created insofar as the applicants' desire to create an addition to the property while reusing the existing foundation rather than perform a complete demolition and rebuild, however this is not necessarily fatal to the application. Page 1 of 2 Condition: Approval is contingent upon the applicant reusing the existing foundation in the construction of the addition. Should portions of the foundation be found to be unusable, the execution of construction must reuse at least 75% of the existing foundation structure. Passes by the following votes: AYES: 7 (B. Gallagher G. Simpson, S. Gaston, O. Maxwell, C. LaPointe, B. Dailey, J. Cohen) RECUSED: NAYES: This variance shall expire 1S months following the filing date of such decision unless the necessary building permit has been issued and actual construction begun as per the Unified Development Ordinance. I hereby certify the above to be a full, true and correct copy of a resolution duly adopted by the Zoning Board of Appeals of the City of Saratoga Springs on the date above mentioned, seven members of the Board being present. SIGNATURE:05/10/2024 Or CHAIR DATE RECEIVED BY ACCOUNTS DEPT. Page 2 of 2 400 SERIES 2021-22 PRODUCT GUIDE FOR PROFESSIONALS *2020 Andersen brand survey of U.S. contractors. CONTRACTORSTRUST THE MOST.* THE WINDOWS *Visit andersenwindows.com/warranty for details. **Products with dark bronze and black interiors have matching exteriors. “Flexacron” is a registered trademark of PPG Industries, Inc. Dimensions in parentheses are in millimeters. Printing limitations prevent exact replication of colors and finishes. See your Andersen supplier for actual color and finish samples. Naturally occurring variations in grain, color and texture of wood make each window one of a kind. All wood interiors are unfinished unless a finish is specified. Distressed bronze and oil rubbed bronze are “living” finishes that will change with time and use. Standard Lock & Keeper Black | Gold Dust | Stone | White Stone is standard with natural interior units. White comes with prefinished white interiors. Other finishes optional. FRAME A Exterior outer frame members are covered with a Perma-Shield® rigid vinyl cladding, minimizing maintenance and providing an attractive appearance. B For exceptional long-lasting* performance, sill members are constructed with a wood core and a Fibrex® material exterior. Sill ends are protected and sealed with weather-resistant covers. C Natural wood stops are available in pine, and prefinished white, dark bronze and black.** D A factory-applied rigid vinyl anchoring flange on the head, sill and sides of the outer frame helps secure the unit to the structure. E An extruded rigid vinyl jamb liner and fin provide a protective seal against the outer frame members. Exclusive slide wash assists make it easy to tilt the sash into wash mode position. Unique block-and-tackle balancers feature sized-to-the-unit, rust-resistant springs that require no adjustment. Glass-reinforced nylon balancer shoes provide smooth, reliable sash operation. Sash can be removed, without tools, for drywall pass-through. Jamb liners are available in white or gray, and must be specified when ordering. Contact your Andersen supplier for details. F Weatherstrip throughout the unit provides a long-lasting,* energy- efficient, weather-resistant seal. For the top and bottom rails, an encased foam material is used. The head jamb liner and sill have a rigid vinyl rib that the weatherstrip material compresses against. At the meeting rail, compressible vinyl bulb material is used. Side jamb liners use leaf-type weatherstrip with foam inserts. SASH Wash assists make it easy to tilt the sash into wash mode. G Wood sash members are treated with a water-repellent preservative for long-lasting* protection and performance. Interior surfaces are unfinished pine. Low- maintenance prefinished white interiors are also available. H A polyester-stabilized coat with a Flexacron® finish is electrostatically applied to penetrate all exterior surfaces for maximum protection and a lustrous finish. I Sash joints simulate the look of traditional mortise-and-tenon construction inside and out. GLASS J In addition to stainless steel glass spacers, black or white glass spacers are now available to allow the spacer to blend in with the unit color. K Silicone bed glazing provides superior weathertightness and durability. L High-Performance options include: •Low-E4® glass •Low-E4 HeatLock® glass •Low-E4 SmartSun™ glass •Low-E4 SmartSun HeatLock glass •Low-E4 Sun glass Tempered and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction, and simplifies finishing at the job site. Patterned Glass Patterned glass options are available. See page 12 for more details. BlackForest Green Terratone FEATURES EXTERIOR & INTERIOR OPTIONS HARDWARE White Canvas Sandtone EXTERIOR COLORS ESTATE™ Antique Brass | Black | Bright Brass | Brushed Chrome Distressed Bronze | Distressed Nickel | Gold Dust | Oil Rubbed Bronze Polished Chrome | Satin Nickel | Stone | White Bold name denotes finish shown. HARDWARE FINISHES Stone Distressed Nickel Satin Nickel Bright Brass Gold Dust Brushed Chrome Polished Chrome White Antique Brass Oil Rubbed Bronze Distressed Bronze Black Dark Bronze OPTIONAL HARDWARE Sold Separately TRADITIONAL CONTEMPORARY Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel Antique Brass | Black | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Gold Dust Oil Rubbed Bronze | Polished Chrome Satin Nickel | Stone | White Optional Estate lock and keeper reduces the clear opening height by 9 ⁄16" (14). Check with local building code officials to determine compliance with egress requirements. Bar Lift Hand Lift Finger Lifts Bar Lift Lock & Keeper INTERIOR OPTIONS **Black** Pine White Dark **Bronze** E L BC D F E G H I J K G 76 TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS Tilt-Wash Picture Grille Patterns Tilt-Wash Double-Hung Tilt-Wash Transom Diamond* Prairie A 6-Light Prairie Colonial CottageEqual CottageEqual CottageEqualCottageEqual Diamond* Prairie A Colonial Colonial with Simulated Fractional with Simulated Fractional with Simulated Victorian Modied Modied Colonial Tall Tall Fractional Short Short Fractional Meeting Rail Meeting Rail Meeting Rail Low-E4® Insulating Glass Horizontal Section 1 7⁄8" (37) 1 7 ⁄8" (37) Clear Opg. Width Unit Dim. Width Minimum Rough Opening Width 1 ⁄4" (6) Min. 1 ⁄4" (6) Min. 1 5 ⁄16" (33) 4 1 ⁄2" (114) Jamb Jamb Upper Sash 3 5 ⁄16" (84) Vertical Section Clear Opg.HeightUnit Dimension HeightMinimum Rough Opening Height4" (102) Sill Stop to Suboor Dimension3⁄8" (10) 1" (25) 1 ⁄2" (13) 2 7⁄16" (62) 1 1 ⁄2" (38) 2 7⁄16" (62) 4 1 ⁄2" (114)1 5 ⁄16" (33) Sill Insect Screen Pine Stool 1" (25) Lower Sash in Open Position Head Meeting Rail Low-E4® Insulating Glass Horizontal Section 1 7 ⁄8" (37) 1 7⁄8" (37) Clear Opg. Width Unit Dim. Width Minimum Rough Opening Width 1 ⁄4" (6) Min. 1⁄4" (6) Min. 1 5⁄16" (33) 4 1⁄2" (114) Jamb Jamb Upper Sash 3 5 ⁄16" (84) Vertical Section Clear Opg.HeightUnit Dimension HeightMinimum Rough Opening Height4" (102) Sill Stop to Suboor Dimension3⁄8" (10) 1" (25) 1 ⁄2" (13) 2 7⁄16" (62) 1 1 ⁄2" (38) 2 7⁄16" (62) 4 1 ⁄2" (114)1 5 ⁄16" (33) Sill Insect Screen Pine Stool 1" (25) Lower Sash in Open Position Head Meeting Rail Horizontal Section Vertical Section All window heights except 310 & 46 Tilt-Wash Double-Hung Window Details Scale 11 ⁄2" (38) = 1'-0" (305) — 1:8 • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Minimum rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 210-211. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. Custom Pattern Examples Specied Equal Light Examples Custom Pattern Examples Specied Equal Light Examples Patterns for double-hung windows are also available in Upper Sash Only (USO) configurations. For picture window patterns that require alignment with double-hung window patterns, identify the sash style (equal, cottage or reverse cottage) when ordering. Number of lights and overall pattern varies with window size. Patterns not available in all configurations. Specified equal light and custom patterns are also available. For more grille options, see page 14 or visit andersenwindows.com/grilles. *Available only in Simulated Divided Light (SDL) configuration and only in 3/4" (19) and 7/8" (22) widths. Horizontal Section 1 7 ⁄8" (37) 1 7 ⁄8" (37) Clear Opg. Width Unit Dim. Width Minimum Rough Opening Width 1 ⁄4" (6) Min. 1 ⁄4" (6) Min. 1 5 ⁄16" (33) 4 1 ⁄2" (114) Jamb Jamb Lower Sash Upper Sash 3 5 ⁄16" (84) Lower Sash in Open Position (opens higher to maintain clear opening) Meeting Rail 1 ⁄2" (51) Upper Sash Meeting Rail (higher location on 310 and 46 heights) Note: Location of support bar on optional insect screen aligns with meeting rail location on 310 and 46 window heights. 310 and 46 Height Windows Only: 85 400 Series Tilt-Wash Double-Hung Full-Frame Windows 400 SERIES *Infringes on the overall net clear opening. Unit clear operable area may not meet egress requirements. See your local building code official for more information. **Do not add combination units to windows with Low-E4 Sun glass unless window glass is tempered. Combination units may also reduce the overall clear operable area of the window. See your local code official for egress requirements in your area. †TruScene insect screens let in over 25% more fresh air than standard Andersen fiberglass insect screens. Dimensions in parentheses are in millimeters. ACCESSORIES Sold Separately 400 Series tilt-wash double-hung full-frame windows are available with Stormwatch® Protection. Visit andersenwindows.com/coastal for more details. Performance Grade (PG) Upgrades A high inside sill stop* with exterior sill brackets and hidden interior brackets is available to provide additional structural support for tilt-wash windows, allowing standard, non-impact glass units to achieve higher performance grade ratings. Performance Grade (PG) ratings are more comprehensive than Design Pressure (DP) ratings for measuring product performance. For up-to- date performance information of individual products, please visit andersenwindows.com. Use of this option will subtract 5 ⁄8" (15) from the clear opening height. PG Upgrade not available for 72" (1829) and 76" (1930) heights. Contact your Andersen supplier for availability. SASH OPTIONS Cottage Reverse Cottage CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-based or latex paint. • Do not paint 400 Series windows in white, canvas, Sandtone, dark bronze, forest green or black exterior colors. • Andersen does not warrant the adhesion or performance of homeowner-applied paint over vinyl or other factory-coated surfaces. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Do not paint weatherstrip. • Creosote-based stains should not come in contact with Andersen products. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. FRAME Extension Jambs Standard jamb depth is 4 1 ⁄2" (114). Extension jambs are available in unfinished pine or prefinished white. Some sizes may be veneered. Factory-applied and non-applied interior extension jambs are available in 1 ⁄16" (1.5) increments between 5 1 ⁄4" (133) and 7 1 ⁄8" (181). Extension jambs can be factory applied to either three sides (stool and apron application) or four sides (picture frame casing). Pine Stool A clear pine stool is available and ready for finishing. The tilt-wash stool is available in 4 9 ⁄16" (116) for use in wall depths up to 5 1 ⁄4" (133), and 6 9 ⁄16" (167) for use in wall depths up to 7 1 ⁄8" (181). Works with 2 1 ⁄4" (57) and 2 1 ⁄2" (64) casing widths. HARDWARE Window Opening Control Device A recessed window opening control device is available factory applied. It limits the sash travel to less than 4" (102) when the window is first opened. Available in white, stone and black. A field-applied window opening control device kit is also available. STORM/INSECT SCREEN COMBINATION UNIT** A self-storing storm window combined with an insect screen provides greater energy efficiency, while allowing ventilation when needed. Constructed with an aluminum frame, single-pane upper and lower glass panels, and charcoal powder-coated aluminum screen mesh. Available in white, Sandtone and Terratone to match product exteriors. Canvas, dark bronze, forest green and black are available by special order. Combination units can improve Sound Transmission Class (STC) and Outdoor Indoor Transmission Class (OITC) ratings. Ideal for projects near airports, busy roadways or other noisy environments. For example, adding a combination unit to a 400 Series tilt-wash double-hung (3862) unit with Low-E4® glass will improve its STC rating from 26 to 32. Contact your Andersen supplier for additional STC and OITC rating information. GLASS Andersen® Art Glass Available for 400 Series tilt-wash transom and picture units. Andersen art glass panels come in a variety of original patterns. See art glass section starting on page 173 for more information or visit andersenwindows.com/artglass. INSECT SCREENS Insect Screen Frames Full and half insect screens are available for most unit sizes. Frame colors match product exteriors. Half insect screen (shown above) allows ventilation without affecting the view through the upper sash. Not available on windows with Stormwatch Protection. TruScene® Insect Screens Andersen TruScene insect screens let in over 25% more fresh air† and provide 50% greater clarity than conventional Andersen insect screens, all while keeping out unwanted small insects. Conventional Insect Screens Conventional insect screens have charcoal powder-coated aluminum screen mesh. GRILLES Grilles are available in a variety of configurations and widths. For double- hung grille patterns, see page 85. EXTERIOR TRIM Available with Andersen exterior trim. See exterior trim section starting on page 175. 77 400 Series Tilt-Wash Double-Hung Full-Frame Windows 400 SERIES PANEL STYLE 403 ARTS AND CRAFTS Interior Exterior Summar y Conguration Single Door Interior Color White Glass Low-E4® Glass Hardware Albany, White Grille Pattern Colonial Grille Width 3/4" 6/30/24, 5:39 PM Design Tool | Andersen Windows https://www.andersenwindows.com/ideas-and-inspiration/design-tool/?configuration=Single Door&frameColor=Interior%3B color%3DWhite&glass=Lo…1/2 We protect what matters most™ GAF shingles and roof accessories are made to work together. They provide a system that’s built to protect homes—so the people who live inside them can enjoy what matters most. The one-stop guide from North America’s largest roofing manufacturer Residential Reference Guide 415172_RESGN100-0223_Residential-Reference-Guide_US-ENGLISH_R2.indd 1 2/11/23 5:13 PM Timberline®Shingles LRS6 Timberline HDZ® pg 7–8 STAINGUARD ALGAE PROTECTION PLUS™LIMITED WARRANTY25 America’s #1-selling shingle—now featuring the industry’s widest nail zone Timberline® UHDZ™ pg 7 & 9 For a highly dimensional wood-shake look in an asphalt shingle Timberline® NS pg 10 The beauty of natural wood shakes in an asphalt shingle Timberline® CS pg 11 STAINGUARD ALGAE PROTECTION PLUS™LIMITED WARRANTY25 Our most reflective shingle America’s Timberline® Lifetime† Shingles Collection More homeowners in North America rely on Timberline® Shingles than any other brand. They offer just the right combination of beauty, performance, and reliability. For specifications see pages 20–21 For the full collection visit gaf.com/Timberline 4 1 1 1 LIFETIME LIMITED WARRANTY TERM † 1 15-year WindProven™ limited wind warranty on GAF Shingles with LayerLock® Technology requires the use of GAF Starter Strips, Roof Deck Protection, Ridge Cap Shingles, and Leak Barrier or Attic Ventilation. See GAF Roofing System Limited Warranty for complete coverage and restrictions. Visit gaf.com/LRS for qualifying GAF products. For installations not eligible for the GAF Roofing System Limited Warranty, see the GAF Shingle & Accessory Limited Warranty. 415172_RESGN100-0223_Residential-Reference-Guide_US-ENGLISH_R2.indd 6 2/11/23 5:14 PM Lifetime†Roofing System LRS5 Leak Barrier 1 Roof Deck Protection 2 Lifetime† Shingles 4 Ridge Cap Shingles 6 Starter Strip Shingles 3 Cobra® Attic Ventilation 5 †Lifetime refers to the length of warranty coverage provided and means as long as the original individual owner(s) of a single-family detached residence [or eligible second owner(s)] owns the property where the qualifying GAF products are installed. For other owners/structures, Lifetime coverage is not applicable. Lifetime coverage on shingles requires the use of GAF Lifetime Shingles only. See the GAF Shingle & Accessory Limited Warranty for complete coverage and restrictions. Visit gaf.com/LRS for qualifying GAF products. Lifetime coverage on shingles and accessories requires the use of any GAF Lifetime Shingle and at least 3 qualifying GAF Accessories. See the GAF Roofing System Limited Warranty for complete coverage and restrictions. For installations not eligible for the GAF Roofing System Limited Warranty, see the GAF Shingle & Accessory Limited Warranty. Visit gaf.com/LRS for qualifying GAF products. 1 Contractors enrolled in GAF certification programs are not employees or agents of GAF, and GAF does not control or otherwise supervise these independent businesses. Contractors may receive benefits, such as loyalty rewards points and discounts on marketing tools from GAF for participating in the program and offering GAF enhanced warranties, which require the use of a minimum amount of GAF products. 415172_RESGN100-0223_Residential-Reference-Guide_US-ENGLISH_R2.indd 5 2/11/23 5:13 PM 3 2 1 4 ®Shingles LRS4 7 2 5 1 6 3 Timberline® UHDZ™ 1 23 4 Most Popular Colors: Barkwood OOOO Charcoal OOOO Pewter Gray OOOO Shakewood OOOO Slate OOOO Weathered Wood OOOO Timberline HDZ ® 1 234567 Most Popular Colors: Barkwood OOOOOOO Charcoal OOOOOOO Hickory OOOOOOO Hunter Green OOOOOOO Mission Brown OOOOOOO Pewter Gray OOOOO 1 OO Shakewood OOOOOOO Slate OOOOOOO Weathered Wood OOOOOOO Harvest Blend Colors: Appalachian Sky OOOO OO Nantucket Morning OOOO OO Golden Harvest OOOOOOO Cedar Falls OOOOOOO Regional Colors: Biscayne Blue O Birchwood2 O OOOO Copper Canyon2 O Driftwood OO Fox Hollow Gray OO Golden Amber1,2 O Oyster Gray OOO Patriot Red O   Sunset Brick O White2 O Williamsburg Slate OO Color Availability 1 Limited availability. 2 Rated by the Cool Roof Rating Council (CRRC) and can be used to comply with 2019 Title 24, Part 6, Cool Roof Requirements of the California Code of Regulations. 4 7 415172_RESGN100-0223_Residential-Reference-Guide_US-ENGLISH_R2.indd 7 2/11/23 5:14 PM Timberline® Shingles LRSNow with GAF Time-Release Algae-Fighting Technology and LayerLock® Technology, Timberline HDZ® offers everything you can expect from an architectural shingle roof, and more. 8 4 Barkwood Driftwood Golden AmberPatriot Red Sunset Brick Biscayne Blue Oyster Gray Fox Hollow GrayBirchwood White Mission Brown Pewter GrayCharcoal ShakewoodHickory Slate Hunter Green Available regionally Williamsburg Slate For more details visit gaf.com/TimberlineHDZ 1 15-year WindProven™ limited wind warranty on GAF Shingles with LayerLock® Technology requires the use of GAF Starter Strips, Roof Deck Protection, Ridge Cap Shingles, and Leak Barrier or Attic Ventilation. See GAF Roofing System Limited Warranty for complete coverage and restrictions. Visit gaf.com/LRS for qualifying GAF products. For installations not eligible for the GAF Roofing System Limited Warranty, see the GAF Shingle & Accessory Limited Warranty. NOTE: It is difficult to reproduce the color clarity and actual color blends of these products. Before selecting your color, please ask to see several full-size shingles. LIFETIME LIMITED WARRANTY TERM † STAINGUARD ALGAE PROTECTION PLUS™LIMITED WARRANTY25 1 Cedar Falls Golden Harvest Nantucket Morning Appalachian Sky Weathered Wood Copper Canyon 415172_RESGN100-0223_Residential-Reference-Guide_US-ENGLISH_R2.indd 8 2/11/23 5:15 PM IMPORTANT FASTENING INFORMATION: James Hardie® siding, trim and soffit products must be installed in a manner that meets local building code and wind load requirements. It is the responsibility of the installer, builder, architect or other building professional and the home or property owner to ensure the fasteners and fastening schedules used result in an installation that is code compliant. Consult ESR 1844 and ESR 2290 or other applicable, local code compliance documentation for guidance on fastener selection and placement to achieve design wind loads for the specific James Hardie siding product, framing type, building height, wind exposure category and other factors relevant to your project. For special circumstances outside the scope of these documents, please refer to the Technical Document library at www.jameshardiepros.com or contact James Hardie’s Technical Services at 1-888-J-HARDIE (1-888-542-7343). Siding to Slabs, Path, Steps Min. 2 in B Min. 2 in Z-Flashing Siding to DeckCSiding to Ground Min. 6 in USA 8 in CANADA A Sheltered Areas Min. 1/4 in Min. 1/4 in USA Min. 1/2 in CANADA Z-Flashing D Field-Joint Flashing Joint Flashing Do NOT caulk joint HMortar Masonry Min. 1/4 in Do NOT caulk.Z-Flashing L-Flashing FHorizontal Flashing Min. 1/4 in Do NOT caulk.Z-Flashing E Block Penetrations Min 1/4in above flashing. DO NOT caulk. Z-Flashing G Kick Out Flashing Kickout flashing Min. 4 in x 4 in J Drip Edge FlashingL Valley Flashing Extend shingles at least 1 in out from the fascia when gutters are present MSiding to Gutter SASSER HOMES 1 in KRoof to Wall Clearances Min. 2 in I QUICK START INSTALLATION GUIDE JamesHardiePros.com IMPORTANT: This document is not intended to take the place of James Hardie published installation instructions. Failure to install and finish this product in accordance with applicable building codes and James Hardie published instructions may lead to personal injury, affect system performance, violate local building codes, and void the product only warranty. For the latest set of complete installation instructions applicable to your jobsite location, visit JamesHardiePros.com or call 1-866-942-7343 (866-9-HARDIE) Estimated one kit per 4000 sq ft of siding or 1600 sq ft of trim. Edge Coater - edge coating is required for any field cuts to seal the edges and make joints less visible. Touch-up Pens - conceal nailheads and very small nicks and scratches less than a dime size. Replace the area with a new piece of plank or panel if area is larger than a dime. JamesHardiePros.com © 2019 James Hardie Building Products, Inc. All Rights Reserved. ™, SM, and ® denote trademarks or registered trademarks of James Hardie Technology Limited. TB1804 09/19 Job Site Storage & Proper Handling James Hardie siding and trim products must be kept dry at all times prior to installation. James Hardie products should be stored in their original packaging. They must be kept off the ground on a pallet. If stored outside, protect with an additional waterproof covering. To help avoid injury and product damage, lap siding, trim, and soffit material should always be carried on edge. One person should hold planks on edge in the middle with arms spread apart to support the product. Panel products should always be carried by two people, on edge. JOBSITE STORAGE PROPER HANDLING ColorPlus Technology Accessories Use caulk that comply with ASTM C920 Grade NS, Class 25 or higher or a latex joint sealant complying with ASTM C834. Apply caulk in accordance with the manufacturer’s written instructions. About 18-20 linear feet per OSI® QUAD® MAX sealant tube. Leave protective laminate sheet in place during cutting, installation and touch-up, then remove laminate and discard. TOUCH-UP KITS COLOR MATCHED CAULK LAMINATE Visit JamesHardiePros.com for the latest installation instructions and useful job-site tips in our industry-leading Best Practice Guide.