HomeMy WebLinkAbout20230934 AC Compressor and Ducting NOD
Tamie Ehinger,
C ITY OF S ARATOGA S PRINGS
Rob DuBoff,
Chris Bennett
D ESIGN R EVIEW B OARD
Leslie DiCarlo
Jeff Gritsavage
Tad Roemer
City Hall - 474 Broadway
Ellen Sheehan
Saratoga Springs, New York 12866 Karen Cavotta,
Tel: 518-587-3550 x.2517
www.saratoga-springs.org
N OTICE OF D ECISION
In the matter of the application
#20230934
AC Compressor and Ducting
39 George Street
Saratoga Springs, New York 12866
involving Historic Review of a new AC compressor and related ducting for a single-family residence within the
Urban Residential-3 District, tax parcel #166.69-1-8, within the City of Saratoga Springs.
In accordance with 6 NYCRR Part 617, the Design Review Commission classifies this request as a SEQR:
Type II action – exempt from further SEQR review
And, in accordance with the objectives, standards and guidelines contained in the Unified Development Ordinance
240-13.9 Historic Review Applicability and Approval Standards, the Design Review Board issues the following
decision on December 6, 2023:
Approve as submitted or shown on the attached plans
Note: this approval shall expire 18 months from the issuance date unless any necessary building permit has been
issued and actual work begun.
Record of vote: motion to approve made by T. Ehinger, seconded by E. Sheehan: passed 6-0
In favor: T. Ehinger, C. Bennett, L. DiCarlo, J. Gritsavage, T. Roemer, E. Sheehan
Absent: R. DuBoff
As a result of this decision, the applicant:
may proceed with the proposed project as approved
Please contact the Building Department to verify permit requirements.
December 13, 2023
Chair Received by Accounts
cc: Building Department
Accounts Dept.
Applicant/Agent
Page 1 of 1
5581700-YTG-F-1021
DESCRIPTION
The YCE models are part of our successful 14 SEER Regional
Minimum Efficiency in the Southeast US. These outdoor units
are specifically designed to be matched with our residential
indoor coils, furnaces, and air handlers to provide a complete
system solution.
FEATURES
GPS!JOTUBMMBUJPO!POMZ!JO!VT!TPVUIFBTU
•Small footprint - Minimum footprint for easier handling,
BOE!OPSUIFSO!SFHJPOT!BOE!DBOBEB
TECHNICAL GUIDE
transportation, and installation.
LXSERIES
•Easier installation - Independent panels provide quick
access for unit setup. Installation time is reduced by easy
SPLIT SYSTEM
power and control wiring access. Select indoor matches with
Jotubmmbujpo!Bmmpxfe
AIR CONDITIONERS
factory-mounted TXVs are available for quicker system
installation. The factory installed filter-drier and factory
14 SEER - R-410A - 1 PHASE
charge for a 15-ft lineset means less time spent brazing and
1.5 TO 5 NOMINAL TON
charging the system. The small base dimension and reduced
unit clearances make for easier retrofits.
MODELS: YCE18 TO 60
•Accessible information - QR code on unit provides quick
access to technical documents and warranty information.
•Durable finish - The coated steel wire fan guard, coated
external fasteners, and pre-treated G90-equivalent galva-
nized steel chassis components resist corrosion and rust
creep. Champagne colored powdercoat paint further protects
external panels.
•Quality coils - The high efficiency microchannel aluminum
coil is manufactured using an improved material system, pro-
viding reliable performance and small unit size.
•Rugged coil protection - Coils are protected from mechani-
cal damage by a proven stamped steel coil guard design.
•Protected compressor - Compressors are protected inter-
nally by a high-pressure relief valve and a temperature sen-
sor, and externally by the system high-pressure switch. The
liquid line filter-drier is factory installed to protect the com-
pressor against moisture and debris.
•Reliable operation - Ball bearing fan motors provide supe-
rior performance in extreme temperatures.
•Environmentally friendly - CFC-free R-410A refrigerant
delivers environmentally friendly performance with zero
ozone depletion.
•Top discharge - Warm air is blown up, away from the struc-
ture and any landscaping, allowing compact location on
multi-unit applications.
•Low operating sound levels - Developed using CFD and
Due to continuous product improvement, specifications
FEA tools, the sturdy cabinet and top design provides sound
are subject to change without notice.
performance of 76 dBA or lower. Compatible accessories for
Visit us on the web at
further sound reduction are also available.
www.simplygettingthejobdone.com and
•Better service access - Diagonal base valves with open
www.york.com
access for low-loss fittings, single panel access to the electri-
cal controls, swing out control box for full corner access, and
Additional rating information can be found at
removable fan guard allow easy access for unit mainte-
www.ahridirectory.org
nance.
WARRANTYSUMMARY*
•Agency listed - Safety certified by CSA to UL 1995/CSA
Standard 5-year limited parts warranty.
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
Standard 10-year limited compressor warranty.
program.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or Internet sales.
See the limited warranty certificate in the User's Information Manual for details.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE