HomeMy WebLinkAbout20230245 118 Woodawn Site Plan ChecklistCity of Saratoga Springs Site Plan Checklist 1
Listed below are the minimum submittal requirements for site plan review as set forth in The City of
Saratoga Springs’ Unified Development Ordinance Article 13.5. The Planning Board reserves the
right to request additional information, as necessary, to support an application. The Board also
reserves the right to reject the application if these minimum requirements are not met. Please
complete the checklist below and provide with your submission.
REQUIRED ITEMS: *4 hard copies (1 w/original signature), 1 digital copy of ALL materials
and Fee are CHECK EACH ITEM
1.Completed Site Plan Application (4 hard copies - *1 w/original signature - and 1 digital) and Fee
2.SEQR Environmental Assessment Form- short or long form as required by action.
3.Set of plans (prepared by a NYS licensed Engineer, Landscape Architect, or Architect) including: (3)
large scale plans (sheets must be 24” x 36”, drawn to a scale of not more than 1”=50 feet), and (1) 11" x
17" copy. One digital version (PDF) of all submittal items printable to scale
4.Basic or Full Storm Water Pollution Prevention Plan as required per Article 17.
5.Copy of signed DPW water connection agreement for all projects involving new water
connections to the City system
6.Engineering Report for Water and Sanitary
7.Complete Streets Checklist
8.Project Cost Estimate for Letter of Credit (Utilize City Template)
REQUIRED ITEMS ON SITE PLAN, AS APPLICABLE:
1.Property line survey prepared by a licensed land surveyor. Site plan must reference such
survey with all corners set and marked on plan. Reference NGVD 1929 datum. A copy of the
original property survey must also be included.
2.North arrow and map scale
3.Parcel tax map number
4.Site location map (with title block and map key)
SITE PLAN REVIEW SUBMITTAL CHECKLIST
CITY OF SARATOGA SPRINGS
PLANNING BOARD
CITY HALL - 474 BROADWAY
SARATOGA SPRINGS, NEW YORK 12866-2296
TEL: 518-587-3550 X2533
www.saratoga-springs.org
5.Incorporate the City's standard engineering details
City of Saratoga Springs Site Plan Checklist 2
6.Site vicinity map (all features within 300 feet of property)
7. Identification of zoning district with corresponding dimensional standards
8. Building setback lines shown on plans.
9.Title block with project name; name and address of applicant; and name and address of
property owner (if different)
10.Project Name
11.Name of all adjacent property owners within 300 feet (Include both sides of street)
12.Parcel street address (existing and any proposed postal addresses)
Yes No N/A 13.Identification of all existing or proposed easements, covenants or legal rights-of-way on this
property
14.References to all prior variances or special use permits
15.Existing and proposed contours and spot grades (at 2 foot intervals) extending to property boundary
16.Identification of all spoil, borrow, storage, or staging areas
17. Identification of all watercourses, designated State wetlands, buffers, Federal wetlands, buffers
floodplains, rock outcroppings, etc.
18.Erosion and sediment control plan – including designated concrete truck washout area
19.Identification of all existing or proposed sidewalks or pedestrian paths (show type, size and
condition)
20.Location, design specifications and construction material for all proposed site improvements
(drains, culverts, retaining walls, berms, fences, etc.)
21.Location and distance to fire hydrant
22.Identify size, material, elevations and slopes of all existing and proposed utilities with 400' of site
23.Parking lot layout plan and identification of all loading areas (number all spaces)
24. Calculation of required spaces for vehicle and bicycle parking by proposed use(s)
25.Identification of parking spaces and access points for physically impaired persons
26.Location and screening plan for dumpster or recycling bins
27.Location, design, type of construction and materials, proposed use and exterior dimensions of
all buildings (existing and proposed) on site including finish floor elevations to nearest tenth foot.
28.Identification of storage of any potentially hazardous materials
29.Planting plan identifying quantity, species and size of all proposed new plant materials.
Label existing plant material to be retained or removed. Identify any existing signficant trees.
30.Lighting plan showing type, location and intensity of all existing and proposed exterior
lighting fixtures
Checklist prepared by:_________________________________________Date:_________________