Loading...
HomeMy WebLinkAbout20221022 Cardona's Saratoga Addition ApplicationCardona’s Market PHOTO 1: FRONT OF EXISTING BUILDING. PHOTO 2: REAR OF THE BUILDING. PHOTO 3: SOUTHEAST SIDE OF BUILDING. PHOTO 4: SOUTHEAST SIDE OF BUILDING. PHOTO 5: MAP OF SITE + ADJACENT PROPERTIES. PHOTO 6: 55 BIRCH ST SARATOGA SPRINGS, NY 12866 PHOTO 7: 216 BIRCH ST SARATOGA SPRINGS, NY 12866 PHOTO 8: 225 WASHINGTON ST SARATOGA SPRINGS, NY 12866 PHOTO 9: 227 WASHINGTON ST SARATOGA SPRINGS, NY 12866 PHOTO 10: 226 WASHINGTON ST SARATOGA SPRINGS, NY 12866 --A5.1128’ - 8"18’ - 0"11’ - 5"12’ - 0"32’ - 0"28’ - 8"OFFICERESTROOMSTORAGEA5.1A5.221LINE OF NEW CANOPYRETAIL 2KITCHENCHECK OUTRETAIL 1SANDWICH LANEA5.22INTAKE79’ - 4"58’ - 1"21’ - 3"WALK-IN COOLER72’ - 8"ScaleDateDrawn BySHEET #:CON #/PHASEPROJECT #:PROJECT NAME:DateDESCRIPTION:#:SEAL:CLIENT:M.E.P. ENGINEER:STRUCTURAL ENGINEER:INTERIOR DESIGN:518.796.6236P.O. BOX 2046, WILTON, NY 12831 JON@THEARCHCOLLABORATIVE.COM3/16" = 1’-0"A2.1FLOOR PLANVN9/27/2222010#XX/XX222 WASHINGTON STA2.13/16" = 1’-0"1FLOOR PLAN GROUND FLOOR0’ -0"T.O. HIP ROOF26’ -11"EXISTING METAL ROOF SYSTEM TO REMAINMEDIAN ROOF HEIGHT25’ -3"EXISTING METAL COPING TO REMAINEXISTING EIFS TO REMAINNEW CANOPY TOMATCH EXISTINGEXISTING BRICK VENEERTO REMAINEXISTING STOREFRONT TO REMAINEXISTING STOREFRONT DOOR SYSTEM TO REMAINT.O. PARAPET18’ -8"WALL PACKWALL PACK15’ - 10"16’ - 11"46’ - 11"GROUND FLOOR0’ -0"T.O. HIP ROOF26’ -11"MEDIAN ROOF HEIGHT25’ -3"T.O. METAL COPING23’ -7"EXISTING METAL ROOF SYSTEM TO REMAINNEW EIFS COLUMNS TO MATCH EXISTINGEXISTING EIFS TO REMAINNEW COLOR TO MATCH BRICK VENEER AT NORTH ELEVATIONEXISTINGBUILDINGNEWADDITIONLINE OF WALK-IN COOLERT.O. PARAPET18’ -8"WALL PACKWALL PACKWALL PACK1’ - 3"28’ - 11"32’ - 0"ScaleDateDrawn BySHEET #:CON #/PHASEPROJECT #:PROJECT NAME:DateDESCRIPTION:#:SEAL:CLIENT:M.E.P. ENGINEER:STRUCTURAL ENGINEER:INTERIOR DESIGN:518.796.6236P.O. BOX 2046, WILTON, NY 12831 JON@THEARCHCOLLABORATIVE.COM3/16" = 1’-0"A5.1EXTERIOR ELEVATIONSVN9.27.2222010#XX/XX222 WASHINGTON STA5.13/16" = 1’-0"1NORTH ELEVATIONA5.13/16" = 1’-0"2WEST ELEVATION GROUND FLOOR0’ -0"T.O. WALK IN COOLER10’ -0"T.O. PARAPET18’ -8"EXISTING WINDOW TO REMAINEXISTING DOOR TO REMAINEXISTING EIFS TO REMAINNEW EIFS TO MATCH EXISTINGLINE OF WALK IN COOLERWALL PACKWALL PACKWALL PACK21’ - 1"11’ - 8"18’ - 0"28’ - 11"GROUND FLOOR0’ -0"T.O. HIP ROOF26’ -11"MEDIAN ROOF HEIGHT25’ -3"EXISTING EIFS TO REMAINNEW COLOR TO MATCH BRICK VENEER AT NORTH ELEVATIONNEW ADDITIONEXISTINGBUILDINGNEW EIFS FIELD PANELS TO MATCH COLOR OF BRICK VENEER AT NORTH ELEVATIONNEW EIFS COLUMNS TO MATCH EXISTINGNEW STOREFRONTWINDOW SYSTEMNEW STOREFRONTWINDOW SYSTEMNEW EIFS HORIZONTALTO MATCH NEW EIFS COLUMNSEXISTING METAL ROOF SYSTEM TO REMAINT.O. PARAPET18’ -8"WALL PACKWALL PACKNEW CANOPIES TO MATCH EXISTING8’ - 1"3’ - 0"1’ - 6"1’ - 4"1’ - 6"26’ - 2"1’ - 6"1’ - 4"1’ - 6"21’ - 7"1’ - 6"1’ - 4"1’ - 6"1’ - 6"5’ - 10"0’ - 8"3’ - 2"0’ - 8"3’ - 7"0’ - 8"2’ - 7"30’ - 6"12’ - 0"LINE OF WALK IN COOLERScaleDateDrawn BySHEET #:CON #/PHASEPROJECT #:PROJECT NAME:DateDESCRIPTION:#:SEAL:CLIENT:M.E.P. ENGINEER:STRUCTURAL ENGINEER:INTERIOR DESIGN:518.796.6236P.O. BOX 2046, WILTON, NY 12831 JON@THEARCHCOLLABORATIVE.COM3/16" = 1’-0"A5.2EXTERIOR ELEVATIONSVN9.27.2222010#XX/XX222 WASHINGTON STA5.23/16" = 1’-0"1SOUTH ELEVATIONA5.23/16" = 1’-0"2EAST ELEVATION BENSONHURSTAVENUEWASHINGTON STREETBIRCH STREET1718192015161112131423451678910WALK INCOOLERBUILDINGEXPANSIONPROPOSEDPLANTER BED9'9'9'TYP.18' TYP.22'29'5'R5'MATCH WITHEXISTING CURBFLUSHASPHALTPAVEMENT5L-4.0HEAVY DUTY CONCRETEPAVEMENT (DUMPSTERPAD ONLY)6L-4.0ASPHALTPAVEMENT5L-4.014.5'MATCH WITHEXISTING CURBFLUSHMATCH WITHEXISTING CURBFLUSHTRANSITION CURB9L-4.0DUMPSTERENCLOSURE5L-4.1FRONTSETBACK 12'R85'R95'3'3'PAVEMENT KEY,TYP.10L-4.0PAVEMENT KEY10L-4.0PAVEMENT KEY,TYP.10L-4.0PAVEMENT KEY,TYP.10L-4.0CONCRETEPANEL6L-4.06" CONCRETE CURB8L-4.06" CONCRETE CURB8L-4.0"NO PARKING" SIGN11L-4.0REAR SETBACK 24'SIDE SETBACK 12'STANDARD DUTYCONCRETE PAVEMENT6L-4.0135.4°'25.4'PAVEMENT KEY,TYP.10L-4.0TRANSITION CURB9L-4.0R150'5', TYP.24.3'28'45.3'19'6'RESET EXISTINGHANDICAP SIGNAGEACCESSIBLEPARKING LAYOUT1L-4.1EXISTING CONCRETEPAD TO REMAINR5'EXISTING DECORATIVESTREET LIGHTEXISTINGDECORATIVESTREET LIGHT"NO PARKING" SIGN11L-4.0DETECTABLEWARNING STRIP8L-4.1PROPOSED EASEMENTTO CARDONA'SSARATOGA, LLC165.65-1-4165.65-1-5165.65-1-9165.65-1-10 165.65-1-14.1165.65-1-14.2165.65-1-16165. 6 5 - 1 - 1 7 165. 6 5 - 2 - 4 8 165.65-2-49 165.65-3-7165.65-3-8165.65-2-40165.65-2-43.11165.65-2-43.13165.65-3-12.1165.65-3-12.2165.65-3-13165.65-3-21165.65-2-19 165.65-2-6 165.65-2-7 165.65-2-8 165.65-2-9 165.65-2-17 165.65-2-18 165.57-2-35165.65-2-37 165.65-2-39 165.65-2-35165.65-3-10.1165.65-3-11.1165.65-2-47165.65-2-20 165.65-2-21165.65-2-22 165.65-2-23 165.65-2-24 165.65-2-25165.65-2-26165.65-2-1165.65-2-2165.65-2-3.1165.65-2-3.21165.65-2-3.22165.65-2-4165.65-2-5WASHINGTON STREETNEWTON AVENUE BENSONHURST AVENUE BIRCH STREET WASHINGTON STREETGRAND AVENUEFOY LANE165.65-2-3.1© the LA Group 2017Unauthorized alteration or addition to thisdocument is a violation of Section 7209 of theNew York State Education Law.Cardona's Saratoga LLC222 Washington StreetSaratoga Springs, NY 12866Save Date: 9/29/2022 10:10 AMFile Name: G:\Proj-2022\2022049_Cardonas_Market_Saratoga_Springs\2022049CAD\L-2.0 Layout Plan.dwgPlotted By:KARA TEDFORD Cardona's Market222 Washington StreetSaratoga Springs, NY 12866Project Title:Prepared for:Drawing TitleDrawing No.Rev:Description:Date:Project No.:Design:Drawn:Date:Scale:Ch'k'd:2022049KLTCPADRC9/28/2022LayoutPlanL-2.01"=20'1.ALL LINE AND GRADE INFORMATION SHALL BE LAID OUT BY A NEWYORK STATE REGISTERED SURVEYOR ENGAGED BY THECONTRACTOR.2.ALL NEW WORK SHALL BE STAKED OUT PRIOR TO CONSTRUCTION.THE OWNER'S REPRESENTATIVE SHALL BE NOTIFIED OF ANYDISCREPANCIES. FIELD ADJUSTMENTS MUST BE APPROVED BY THEOWNER'S REPRESENTATIVE PRIOR TO CONSTRUCTION.3.ALL LINES AND DIMENSIONS ARE PARALLEL OR PERPENDICULAR TOTHE LINES FROM WHICH THEY ARE MEASURED UNLESS OTHERWISENOTED.4.DIMENSIONS TO CURBS ARE FROM FACE OR BOTTOM OF CURB TOFACE OR BOTTOM OF CURB.5.FIELD ADJUSTMENTS MUST BE APPROVED BY THE OWNER'SREPRESENTATIVE AND IF NECESSARY APPROPRIATE MUNICIPALOFFICIALS.6.ALL LAYOUTS FOR WALKS AND PATHS SHALL BE ADEQUATELY STAKEDBY THE CONTRACTOR AND APPROVED BY THE OWNER'SREPRESENTATIVE PRIOR TO CONSTRUCTION.7.ALL PROPOSED WALKS, PAVEMENTS, LIGHTS AND SITEIMPROVEMENTS SHALL BE STAKED IN THE FIELD FOR APPROVAL BYTHE OWNER'S REPRESENTATIVE PRIOR TO CONSTRUCTION.8.CONTRACTOR SHALL COORDINATE LOCATION OF ALL UTILITIES (LINES,DUCTS, CONDUITS, SLEEVES, FOOTINGS, ETC.) WITH LOCATIONS OFPROPOSED LANDSCAPE ELEMENTS (WALLS, FENCE, FOOTINGS, TREEROOTBALLS, PROPOSED LIGHTING FOOTINGS, ETC.). CONTRACTORSHALL REPORT ANY DISCREPANCIES TO OWNER'S REPRESENTATIVEPRIOR TO CONTINUING WORK.9.ALL EXISTING UTILITIES ARE SHOWN IN THEIR RELATIVE POSITION.CONTRACTOR IS RESPONSIBLE FOR VERIFYING THE VERTICAL &HORIZONTAL POSITION OF EXISTING UTILITIES PRIOR TOCONSTRUCTION.10.THE LOCATION OF ALL EXISTING TREES SHOWN AND IDENTIFIED SHALLBE FIELD VERIFIED PRIOR TO CONSTRUCTION AND ANYDISCREPANCIES REPORTED TO OWNER'S REPRESENTATIVE.LAYOUT NOTES:105101520200Scale: 1" = 20'Planning Board # 22.XXXXLEGENDPROPERTY LINENEW CONCRETENEW ASPHALT PAVEMENTPROPERTY SETBACK01001005020406080Scale: 1" = 100'LIMIT OF DISTURBANCE (0.2 ACRES)EXPANSION JOINTCONTROL JOINTTOPSOIL AND SEEDEXISTING TREELINEPROPOSED TREELINEEXISTING TREES (GREATER THAN 3" DBH)SEE NOTE 10EXISTING TREES (LESS THAN 3" DBH)PROPOSED TREESPROPOSED SHRUBSPROPOSED LIGHTINGEXISTING LIGHTING Introduction The WDGE LED family is designed to meet specifier’s every wall-mounted lighting need in a widely accepted shape that blends with any architecture. The clean rectilinear design comes in four sizes with lumen packages ranging from 1,200 to 25,000 lumens, providing a true site-wide solution. Embedded with nLight® AIR wireless controls, the WDGE family provides additional energy savings and code compliance. WDGE3 has been designed to deliver up to 12,000 lumens through a precision refractive lens with wide distribution, perfect for augmenting the lighting from pole mounted luminaires. D1W D2 H One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE3 LED Rev. 03/01/22 COMMERCIAL OUTDOOR WDGE3 LED Architectural Wall Sconce Catalog Number Notes Type Depth (D1):8" Depth (D2):1.5" Height:9" Width:18" Weight: (without options)19.5 lbs Hit the Tab key or mouse over the page to see all interactive elements. Specifications Series Package Color Temperature CRI Distribution Voltage Mounting WDGE3 LED P1 P2 P3 P4 30K 3000K 40K 4000K 50K 5000K 70CRI 80CRI R2 Type 2 R3 Type 3 R4 Type 4 RFT Forward Throw MVOLT 347 1 480 1 Shipped included SRM Surface mounting bracket ICW Indirect Canopy/Ceiling Washer bracket (dry/ damp locations only)4 Shipped separately AWS 3/8inch Architectural wall spacer PBBW Surface-mounted back box (top, left, right conduit entry). Use when there is no junction box available. Options Finish E15WH Emergency battery backup, Certified in CA Title 20 MAEDBS (15W, 5°C min) E20WC Emergency battery backup, Certified in CA Title 20 MAEDBS (18W, -20°C min) PE 2 Photocell, Button Type DMG 3 0-10V dimming wires pulled outside fixture (for use with an external control, ordered separately) BCE Bottom conduit entry for back box (PBBW). Total of 4 entry points. SPD10KV 10kV Surge pack BAA Buy America(n) Act Compliant Standalone Sensors/Controls PIR Bi-level (100/35%) motion sensor for 8-15’ mounting heights. Intended for use on switched circuits with external dusk to dawn switching. PIRH Bi-level (100/35%) motion sensor for 15-30’ mounting heights. Intended for use on switched circuits with external dusk to dawn switching PIR1FC3V Bi-level (100/35%) motion sensor for 8-15’ mounting heights with photocell pre-programmed for dusk to dawn operation. PIRH1FC3V Bi-level (100/35%) motion sensor for 15-30’ mounting heights with photocell pre-programmed for dusk to dawn operation. Networked Sensors/Controls NLTAIR2 PIR nLightAIR Wireless enabled bi-level motion/ambient sensor for 8-15’ mounting heights. NLTAIR2 PIRH nLightAIR Wireless enabled bi-level motion/ambient sensor for 15-30’ mounting heights. See page 4 for out of box functionality DDBXD Dark bronze DBLXD Black DNAXD Natural aluminum DWHXD White DSSXD Sandstone DDBTXD Textured dark bronze DBLBXD Textured black DNATXD Textured natural aluminum DWHGXD Textured white DSSTXD Textured sandstone Ordering Information EXAMPLE: WDGE3 LED P3 40K 70CRI R3 MVOLT SRM DDBXD Luminaire Standard EM, 0°C Cold EM, -20°C Sensor Lumens (4000K) P1 P2 P3 P4 P5 P6 WDGE1 LED 4W ----1,200 2,000 -------- WDGE2 LED 10W 18W Standalone / nLight 1,200 2,000 3,000 4,500 6,000 -- WDGE3 LED 15W 18W Standalone / nLight 7,500 8,500 10,000 12,000 ---- WDGE4 LED ----Standalone / nLight 12,000 16,000 18,000 20,000 22,000 25,000 WDGE LED Family Overview Accessories Ordered and shipped separately. WDGEAWS DDBXD WDGE 3/8inch Architectural Wall Spacer (specify finish) WDGE3PBBW DDBXD U WDGE3 surface-mounted back box (specify finish) NOTES 1 347V and 480V not available with E15WH and E20WC. 2 PE not available in 480V and with sensors/controls. 3 DMG option not available with sensors/controls. 4 Not qualified for DLC. Not available with emergency battery backup or sensors/controls Buy American Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. Use these factors to determine relative lumen output for average ambient temperatures from 0-40°C (32-104°F). Lumen Ambient Temperature (LAT) Multipliers One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE3 LED Rev. 03/01/22 COMMERCIAL OUTDOOR Performance Data Lumen Output Ambient Lumen Multiplier 0°C 32°F 1.05 10°C 50°F 1.03 20°C 68°F 1.01 25°C 77°F 1.00 30°C 86°F 0.99 40°C 104°F 0.97 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the platforms noted in a 25°C ambient, based on 10,000 hours of LED testing (tested per IESNA LM-80-08 and projected per IESNA TM-21-11). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours 0 25,000 50,000 100,000 Lumen Maintenance Factor 1.0 >0.98 >0.97 >0.92 Performance Package System Watts Current (A) 120V 208V 240V 277V 347V 480V P1 52W 0.437 0.246 0.213 0.186 0.150 0.110 P2 59W 0.498 0.287 0.251 0.220 0.175 0.126 P3 71W 0.598 0.344 0.300 0.262 0.210 0.152 P4 88W 0.727 0.424 0.373 0.333 0.260 0.190 Electrical Load Performance Package System Watts Dist. Type 30K (3000K, 70 CRI)40K (4000K, 70 CRI)50K (5000K, 70 CRI) Lumens LPW B U G Lumens LPW B U G Lumens LPW B U G P1 52W R2 7,037 136 1 0 1 7,649 148 2 0 1 7,649 148 2 0 1 R3 6,922 134 1 0 2 7,524 145 1 0 2 7,524 145 1 0 2 R4 7,133 138 1 0 2 7,753 150 1 0 2 7,753 150 1 0 2 RFT 6,985 135 1 0 2 7,592 147 1 0 2 7,592 147 1 0 2 P2 59W R2 7,968 135 2 0 1 8,661 147 2 0 1 8,661 147 2 0 1 R3 7,838 133 1 0 2 8,519 144 1 0 2 8,519 144 1 0 2 R4 8,077 137 1 0 2 8,779 149 1 0 2 8,779 149 1 0 2 RFT 7,909 134 1 0 2 8,597 146 2 0 2 8,597 146 2 0 2 P3 71W R2 9,404 132 2 0 1 10,221 143 2 0 1 10,221 143 2 0 1 R3 9,250 130 2 0 2 10,054 141 2 0 2 10,054 141 2 0 2 R4 9,532 134 2 0 2 10,361 145 2 0 2 10,361 145 2 0 2 RFT 9,334 131 2 0 2 10,146 142 2 0 2 10,146 142 2 0 2 P4 88W R2 11,380 129 2 0 1 12,369 140 2 0 1 12,369 140 2 0 1 R3 11,194 127 2 0 2 12,167 138 2 0 2 12,167 138 2 0 2 R4 11,535 131 2 0 2 12,538 142 2 0 2 12,538 142 2 0 2 RFT 11,295 128 2 0 2 12,277 139 2 0 2 12,277 139 2 0 2 Option Dist. Type Lumens E15WH R2 3,185 R3 3,133 R4 3,229 RFT 3,162 E20WC R2 3,669 R3 3,609 R4 3,719 RFT 3,642 Lumen Output in Emergency Mode (4000K, 70 CRI) Lumen Multiplier for 80CRI CCT Multiplier 30K 0.891 40K 0.906 50K 0.906 To see complete photometric reports or download .ies files for this product, visit the Lithonia Lighting WDGE LED homepage. Tested in accordance with IESNA LM-79 and LM-80 standards. One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE3 LED Rev. 03/01/22 COMMERCIAL OUTDOOR Photometric Diagrams The emergency battery backup is integral to the luminaire — no external housing required! This design provides reliable emergency operation while maintaining the aesthetics of the product. All emergency battery backup configurations include an independent secondary driver with an integral relay to immediately detect loss of normal power and automatically energize the luminaire. The emergency battery will power the luminaire for a minimum duration of 90 minutes (maximum duration of three hours) from the time normal power is lost and maintain, minimum of 60% of the light output at the end of 90minutes. Applicable codes: NFPA 70/NEC – section 700.16, NFPA 101 Life Safety Code Section 7.9 The examples below show illuminance of 1 fc average and 0.1 fc minimum in emergency mode with E15WH or E20WC and R4 distribution. Emergency Egress Options Emergency Battery Backup WDGE3 LED xx 40K 70CRI R4 MVOLT E15WH Grid = 10ft x 10ft WDGE3 LED xx 40K 70CRI R4 MVOLT E20WC LEGEND 0.25 fc 0.5 fc 1.0 fc WDGE3 LED P3 40K 70CRI R2WDGE3 LED P3 40K 70CRI R2 MH = 15ft Grid = 15ft x 15ft WDGE3 LED P3 40K 70CRI R3WDGE3 LED P3 40K 70CRI R3 WDGE3 LED P3 40K 70CRI R4WDGE3 LED P3 40K 70CRI R4 WDGE3 LED P3 40K 70CRI RFTWDGE3 LED P3 40K 70CRI RFT 40' 0.1 fc min. 1.0 fc avg. 12' 30' 30' 0.1 fc min. 1.0 fc avg. 15' 27' 12' MH 15' MH 40' 0.1 fc min. 1.0 fc avg. 12' 35' 30' 0.1 fc min. 1.0 fc avg. 15' 30' 12' MH 15' MH One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE3 LED Rev. 03/01/22 COMMERCIAL OUTDOOR Motion/Ambeint sensor (Sensor Switch MSOD) is integrated into the the luminaire. The sensor provides both Motion and Daylight based dimming of the luminaire. For motion detection, the sensor utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size motion while preventing false tripping from the environment. The integrated photocell enables additional energy savings during daytime periods when there is sufficient daylight. Optimize sensor coverage by either selecting PIR or PIRH option. PIR option comes with a sensor lens that is optimized to provide maximum coverage for mounting heights between 8-15ft, while PIRH is optimized for 15-40ft mounting height. Control / Sensor Options Motion/Ambient Sensor (PIR_, PIRH_) nLight® AIR is a wireless lighting controls platform that allows for seamless integration of both indoor and outdoor luminaires. Five-tier security architecture, 900 MHz wireless communication and app (CLAIRITY™ Pro) based configurability combined together make nLight® AIR a secure, reliable and easy to use platform. Networked Control (NLTAIR2) HIGH VIEW 0 ft 15 0 m 4.6 30 24 18 12 6 0 ft 6 12 18 24 30 9.2 7.4 5.4 3.6 1.8 0 m 1.8 3.6 5.4 7.4 9.2 30 24 18 12 6 0 ft 6 12 18 24 30 9.2 7.4 5.4 3.6 1.8 0 m 1.8 3.6 5.4 7.4 9.2 LOW VIEW 0 ft 9 0 m 2.7 18 15 12 9 6 3 0 ft 3 6 9 12 15 18 5.4 4.6 3.6 2.7 1.8 0.9 0 m 0.9 1.8 2.7 3.6 4.6 5.4 18 15 12 9 6 3 0 ft 3 6 9 12 15 18 5.5 4.6 3.7 2.7 1.8 0.9 0 m 0.9 1.8 2.7 3.7 4.6 5.5 PIR PIRH TOP VIEW 20 10 0 ft 10 20 6.1 3 0 m 3 6.1 20 0 ft 20 6.1 0 m 6.1 SIDE VIEW 0 ft 10 20 30 40 0 m 3 6.1 9.1 12.2 TOP VIEW 20 10 0 ft 10 20 6.1 3 0 m 3 6.1 20 0 ft 20 6.1 0 m 6.1 SIDE VIEW 0 ft 10 20 30 40 0 m 3 6.1 9.1 12.2 Option Dim Level High Level (when triggered Photocell Operation Motion Time Delay Ramp-down Time Ramp-up Time PIR or PIRH Motion - 3V (37% of full output) Photocell - 0V (turned off) 10V (100% output)Enabled @ 5fc 5 min 5 min Motion - 3 sec Photocell - 45 sec PIR1FC3V, PIRH1FC3V Motion - 3V (37% of full output) Photocell - 0V (turned off)10V (100% output)Enabled @ 1fc 5 min 5 min Motion - 3 sec Photocell - 45 sec NLTAIR2 PIR, NLTAIR2 PIRH (out of box) Motion - 3V (37% of full output) Photocell - 0V (turned off)10V (100% output)Enabled @ 5fc 7.5 min 5 min Motion - 3 sec Photocell - 45 sec Motion/Ambient Sensor Default Settings One Lithonia Way • Conyers, Georgia 30012 • Phone: 1-800-705-SERV (7378) • www.lithonia.com © 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. WDGE3 LED Rev. 03/01/22 COMMERCIAL OUTDOOR FEATURES & SPECIFICATIONS INTENDED USE Common architectural look, with clean rectilinear shape, of the WDGE LED was designed to blend with any type of construction, whether it be tilt-up, frame or brick. Applications include commercial offices, warehouses, hospitals, schools, malls, restaurants, and other commercial buildings. CONSTRUCTION The single-piece die-cast aluminum housing to optimize thermal transfer from the light engine and promote long life. The driver is mounted in direct contact with the casting for a low operating temperature and long life. The die-cast door frame is fully gasketed with a one-piece solid silicone gasket to keep out moisture and dust, providing an IP65 rating for the luminaire. FINISH Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Standard Super Durable colors include dark bronze, black, natural aluminum, sandstone and white. Available in textured and non-textured finishes. OPTICS Individually formed acrylic lenses are engineered for superior application efficiency which maximizes the light in the areas where it is most needed. Light engines are available in 3000 K, 4000 K or 5000 K configurations. The WDGE LED has zero uplight and qualifies as a Nighttime Friendly™ product, meaning it is consistent with the LEED® and Green Globes™ criteria for eliminating wasteful uplight. ELECTRICAL Light engine consists of high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L92/100,000 hours at 25°C). The electronic driver has a power factor of >90%, THD <20%. Luminaire comes with built in 6kV surge protection, which meets a minimum Category C low exposure (per ANSI/IEEE C62.41.2). Fixture ships standard with 0-10v dimmable driver. INSTALLATION A universal mounting plate with integral mounting support arms allows the fixture to hinge down for easy access while making wiring connections. The 3/8” Architectural Wall Spacer (AWS) can be used to create a floating appearance or to accommodate small imperfections in the wall surface. The ICW option can be used to mount the luminaire inverted for indirect lighting in dry and damp locations. Design can withstand up to a 1.5 G vibration load rating per ANSI C136.31. LISTINGS CSA certified to U.S. and Canadian standards. Light engines are IP66 rated; luminaire is IP65 rated. PIR options are rated for wet location. Rated for -40°C minimum ambient. DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified. International Dark-Sky Association (IDA) Fixture Seal of Approval (FSA) is available for all products on this page utilizing 3000K color temperature and SRM mounting only. BUY AMERICAN Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT. Please refer to www.acuitybrands.com/buy-american for additional information. WARRANTY 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Mounting, Options & Accessories D = 8" H = 11" W = 18" NLTAIR2 PIR – nLight AIR Motion/Ambient Sensor D = 1.75" H = 9" W = 18" PBBW – Surface-Mounted Back Box Use when there is no junction box available. D = 0.38" H = 4.4" W = 7.5" AWS – 3/8inch Architectural Wall Spacer