HomeMy WebLinkAbout20220269 Espey Manufacturing Demolition and New Structure Espey Combined Design Package Prepared For:
Espey Manufacturing
& Electronics Corp.
233 Ballston Ave.
Saratoga Springs, NY 12866
Submitted by:
LaBella Associates
4 British American Blvd.
Latham, NY 12110
(518) 439-8235
o
� Pr ject Loca4'on
1,
Overall Aerial Map
°
r - 3wrietoan'on
Local Aerial Map.
LaBeLLa
Powered by partnership.
Design Review Commission—Proposed Building
APRIL 21ST, 2022
PROJECT NO. 2221534
TABLE OF CONTENTS:
Exposed Fastening System Options for Walls and Roofing . . . . . . . . . . . . . . . . . . . . . . . . . . Pg. 3 - 4
Egress Door Design Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pg. 5 - 8
Overhead Door Design Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pg. g - 24
LaBeLLa
Powered by partnership.
Design Review Commission—Proposed Building
APRIL 21ST, 2022
PROJECT NO. 2221534
e:.
EXPOSED FASTENING
SYSTEMS
MBCI exposed fastening systems help provide contemporary and environmentally-friendly
aesthetics. Oftentimes these panels can be installed both vertically and horizontally, giving you
numerous options for your design.To see all of our exposed-fastening options,visit us online at
mbci.com or shop.mbci.com.
PROJECT:Axiom Apartments LOCATION:San Antonio,TX PANEL PROFILE:PBU COLOR:Harbor Blue
7.2 PANEL When your design calls for a commercial or industrial exposed fastener panel,the 7.2 Panel is an
ideal choice.This panel offers versatility and functionality for roofs and walls.The symmetrical
rib 7.2 Panel offers excellent spanning and cantilever capabilities,making it an excellent choice
Alkirfor carports and walkway canopies.When used on walls,the 7.2 Panel is typically ordered as
"reverse rolled"and can be installed either vertically or horizontally.
Product Specifications
• Applications:Roof and Wall Gauges:24(standard);22,26,29(optional)
• Coverage Width:36" Texture:Smooth(standard);Embossed
36' Rib Spacing:7.2"on Center (optional)
11/2 Rib Height:11/2" Coatings:Galvalu me Plus',Signature"200,
I
• Minimum Slope:Y2:12 Signature°300,Signature°300 Meta llic
• Panel Attachment:Exposed Fastening System
PBR The PBR panel is commonly used for a wide variety of architectural,agricultural,commercial
and industrial applications.PBR is a structural,exposed-fastened panel that can be used for
both roof and wall applications.The minimum roof slope for PBR is'/2:12.
Product Specifications
• Applications:Roof and Wall Gauges:26(standard);22,24,29(optional)
Coverage Width:36" Texture:Smooth(standard);Embossed
• Rib Spacing:12"on Center (optional)
• Rib Height:11/4" Coatings:Galvalume Plus',Signature"200,
12" 36" 11/4 • Minimum Slope:Y2:12 Signature°300
• Panel Attachment:Exposed Fastening System
PBC The PBC panels can be used for both roof and wall applications.PBC panels are attached
to a building structure with exposed fasteners and is often used in horizontal applications on
walls.
Product Specifications IMV • Applications:Roof and Wall Gauges:26(standard);22,24,29(optional)
• Coverage Width:32" Texture:Smooth(standard);Embossed
• Rib Spacing:2.67"on Center (optional)
32 Rib Height:%," Coatings:Galvalume Plus',Signature"200,
• Minimum Slope:3:12 Signature°300
• Panel Attachment:Exposed Fastening System
PBD The PBD panel is an exposed-fastened panel system that can be used for roof and wall
applications.When used in wall applications,panels can be installed vertically or horizontally.
The ribs in the PBD panel are symmetrical from top to bottom,which makes this panel ideal as
a roof liner.
Product Specifications
• Applications:Roof and Wall Gauges:26(standard);22,24,29(optional)
• Coverage Width:32" Texture:Smooth(standard);Embossed
2F7" 32s/e" Rib Spacing:2.67"on Center (optional)
• Rib Height: 5/,," Coatings:Galvalume Plus°,Signature"200,
• Minimum Slope:3:12 Signature°300
• Panel Attachment:Exposed Fastening System
14 mbci.com shop.mbci.coen
C=—CecoDoor TECH-DATA
ASM ABLOY
1 -3/4" REGENT (RI) HONEYCOMB CORE DOORS
FLUSH AND EMBOSSED PANEL STEEL DOORS
BEVELED LOCK EDGE, HANDED
Kraft fiber honeycomb slab,
bonded to the inside of both
,Y face sheets with a water
Y i, resistant, contact adhesive.
A
Suggested Use:
A � Interior or Exterior...
Y Office, Motel/Hotel, Apartment,
Urban Renewal, Health Care,
Institutional, Mercantile,
Public Utility, Factory, or Warehouse.
DOOR DESIGNS
F G G2 G3 V N___ N___ GLB FG LB
® ® ❑❑ ❑❑ ❑❑ ❑❑ ❑® ❑m
DDT 0 � 00 � � on 00 0
® DDB 00 00 00 00 00 00 00
LID LT DUTCH E603 E601, EN61 E602, EN62, E605, E606 E607, E608 E609, EN69 E604, EN63
V, G, & N EN63 EN66
DESIGNS AVAILABLE
EMBOSSED 6 PANEL
ORDER CODES AND DOOR WIDTHS
2'6$$ 2'8$$ 2'8$$ 3'0$$
NARROW 6 PANEL STD. 6 PANEL
EN61 E603 6
EN62 E601 PANEL
o EN63 E602 MAX. SIZE 3'0"x7'0"
N EN66 E605
E607 E606 MIN. SIZE 2'6"x6'8"
o E608 E607 ALL 6 PANEL EMBOSSED DESIGNS WILL
EN69 E608 BE CENTER EDGE SEAM CONSTRUCTION.
EN63 E609
E603 E604
xpenence a sa er
and more open world D 1
TECH-DATA REGENT DOORS
N
I
Hardware locations shown match Ceco standard frames.
0
0 0 N 3 1
O
0 �o 1/8"
co i� i� i� 4
8.875" L_J C
O
J Y H
J UO CD
17 Q J W
O (o U
W 2
U) O C�
N Z 8 J Z_ LLI
Z 2
a_ O a_ Q
00 co
N (n - J
N C� O
0 Q
z 2
J U
Q Q
n oo z
O N LO o � 0
N
5 z
El
8.25"
Finished Floor 3/4"
DOOR ELEVATION VERTICAL SECTION
DOUBLE SWING 7
ZSINGLE SWING
11111111k ,====
I� ACT LEAF WIDTH �� �� ACT LEAF WIDTH �� �� ACT LEAF WIDTH
3/32" NOMINAL DOOR 1/8" 3/32" NOMINAL DOOR 3/32"
OPENING WIDTH OPENING WIDTH
HORIZONTAL SECTIONS
(Conversion: 1" = 25.4 mm, e.g., 1-3/4" = 44.45 mm)
OVERLAPPING ASTRAGAL 7 O7 OVERLAPPING ASTRAGAL O7
4441 4471
FOR 1-3/4" THICK FOR 1-3/4" THICK
DOORS DOORS
STEEL f STEEL
INACTIVE ACTIVE 3
INACTIVE ACTIVE
N STEEL
M 11
LISTED LISTED
0
=Ceco Door
Experience a safer
and more open world ASSA►ABLOY
TECH-DATA REGENT DOORS
16 GAGE STEEL O1 VERTICAL EDGES Epoxy Seal O
END CHANNELS Hairline \
M MECHANICALLY Seam \
WELDED i INTERLOCKED
TO BOTH i HEMMED EDGES
FACE SHEETS 14 GAGE DOORS WILL BE
CENTER EDGE SEAM
INVERTED CONSTRUCTION
TOP AND OPTIONAL:
BOTTOM �' SEAMLESS (WELDED
i OR BODY FILLER)
OPTIONAL TOP AND ALL 6 PANEL EMBOSSED DESIGNS
BOTTOM CAPS ARE AVAILABLE WILL BE CENTER EDGE SEAM CONSTRUCTION.
CLOSER O3 LOCK PREPARATION
REINFORCEMENT GOV. 1 60/1 61
(OPTIONAL) ��' CYLINDRICAL TYPE
14 GAGE STEEL i (LC1 )
CHANNEL 20" LONG i ,
(ANSI Al 15.2)
i 2-3/4" .I
BAC KS ETAl
J
V
LOCK EDGE IS BEVELED
HINGE LOCK
1/8" in 2" (1:16)
O5
PREPARATION PREPARATION
GOV. 86, ANSI/BHMA A115.1
MORTISE TYPE
4-1/2 OR 5 IN. 7 GAGE
HIGH, STANDARD REINFT ANSI A156.7 (LIMO)
OR HEAVY WEIGHT, I, TEMPLATE
FULL MORTISE \ I"a
HINGES I
NOTE: EITHER OF THE LOCK
REINFORCEMENTS/
BERDS SHOWN INSTALLEDWI MAY
HINGE EDGE IS HANDED �' � ��
AND NOT BEVELED. ANY MORTISE LOCK
PREPARATION.
VERTICAL EDGES O2 GLAZING TRIM ® FIXED SLAT TYPE LOUVER O
16 GAGE SlimTrim 4634
ALL 6 PANEL FULL HEIGHT
DESIGNS ARE CHANNEL FOR ALL FOR 1-3/4" THICK
CENTER EDGE FIRE DOORS DOORS
SEAM CONSTRUCTION 50% FREE AIR FLOW
14 GAGE WILL BE 3/8" WIDE
CENTER EDGE SEAM GLAZING
CONSTRUCTION POCKET
WELD SEAMLESS AND STEEL
BODY FILLER
SEAMLESS
IS OPTIONAL
cli
GCecoDoor STEEL
LISTED
0
P'K.7r. A ABLO i (Conversion: 1" = 25.4 mm, e.g., 1-3/4" = 44.45 mm)
Experience a safer
and more open world
TECH-DATA REGENT DOORS
PRODUCT SPECIFICATIONS:
0
1-3/4" Thick steel doors shall be as manufactured by Ceco Door Products.
Doors shall conform to the Steel Door Institute guide specification, ANSI
STANDARD SIZES A250.8; see chart below for performance classifications.
NOMINAL DOOR OPENING
WIDTH REGENT doors are made full-flush or (optional) seamless style. Face sheets
HEIGHT are commercial quality cold rolled steel conforming to ASTM A1008 ...or
SINGLE DOUBLE (optional) hot-dipped galvannealed or galvanized steel conforming to ASTM
2'-0$$ 4'-0" A924 and A653 -- see chart below.
2'-4" 4'-8"
2'-6" 5'-0" 6'-8" Regent full-flush doors have mechanically interlocked, hemmed, hairline
2'-8" 5'-4" 7'-0" seams on vertical edges and have no visible seams on faces. Embossed 6
2'-10" 5'-8" 7'-2"
3'-0$$ 6'-0" 7'-10" panel doors will have center edge seam construction. Doors specified
3'-4" 6'-8" 8'-0" "seamless"have no visible seams on faces or vertical edges (S.D.I. Model 2).
3'-6" 7'-0" 9'-0" A one piece, kraft honeycomb core is securely bonded to both face sheets
3'-8" 7'-4" under pressure with contact adhesive. The top and bottom door edges are
3'— " 7'-0" closed with 16 gage steel channels welded to both face sheets.
4'-0" s'-o" g g
Hardware Provisions: Hinge preparations are handed. Hinge edges are
FIRE DOORS mortised for 4-1/2" or 5" high, standard and heavy weight hinges (specify
which). 7 gage steel hinge reinforcements are welded inside the door edge
LABELING AGENCIES: and are drilled and tapped for fasteners in accordance with ANSI A156.7. The
lock edge has a standard bevel (1:16) and is prepared for Gov. series 86,
• UNDERWRITERS LABORATORY 160/161, or 90 locks in accordance with ANSI A115 (specify which). Optional
• A O HERSEY
F
• FACTTORYY MUTUAL gage closer reinforcement is a 14 steel channel.
TEST: UL10C, UL10B, UL1784, Paint: 1-3/4"steel doors shall be provided with one coat of oven-cured neutral
& NFPA 252 color primer paint. Primer coat shall conform with ANSI A250.10. The primer
•RATING: 20 MIN, 3/4 HR, coat is a preparatory base for necessary finish painting. "Colorstyle"finish coat
1 HR, 1-1/2 HR, OR 3 HR is also available from a selection of standard colors(optional).Colorstyle finish
•MAX. SIZE: 4'0" x 9'0" SINGLE is electrostatically applied, oven-cured urethane enamel, and shall conform to
8'0" x 9'0" PAIR ANSI A250.3. For accurate color selectors ask for a Ceco Colorstyle chart.
•DESIGNS: F, FG, G, N, & V
Not all ratings are available
in all sizes, designs and
materials.
MATERIAL
DOOR FACE SHEETS LEVEL C.R. GALV RECOMMENDED
A60 G90 DOOR FRAME MATERIAL
20 Gage Steel (4080 max.) Standard Duty N/A STD N/A 16 Gage Steel
18 Gage Steel Heavy Duty STD OPT OPT 16 Gage Steel
16 Gage Steel Extra Heavy Duty STD OPT OPT 16 or 14 Gage Steel
14 Gage Steel Maximum Duty STD OPT OPT 14 or 12 Gage Steel
PERFORMANCE
Sound Transmission STC 32 (F Design, 18 Gage Face Sheets,
Class: ASTM E90 & E413 [Fully 0 erable
Physical Endurance Meets ANSI A250.4 Performance Test, 20 GAGE: Level B (500,000
Level: Cycles); 18 and 16 Gage: Level A (1,000,000 Cycles)
0
N
M
o (Conversion: 1" = 25.4 mm, e.g., 1-3/4" = 44.45 mm) CGeco Door
Experience a safer
and more open world A%A ABLOY
N
THERMACORE@ DOOR SYSTEMS
J
PRODUCT LINE o 591/592/593/594/596/598/599/850
Z
5
10I
:000II-111J, -
Z
INDUSTRY LEADING
COMMERCIAL&INDUSTRIAL SOLUTIONS
- - ,v�gl'IEAD DOO
O .R
THERMACORE° DOOR SYSTEMS INSULATED SECTIONAL • •
It
General features and benefits
Constructed for superior performance • Solid steel counterbalance shaft reduces fatigue
• Continuous foamed in place polyurethane insulation and deflection
and roll-formed, hot-dipped galvanized steel construction • Double end stiles and end hinges lessen loads on
provides superior thermal efficiency, exceptional door-section
strength-to-weight ratio and proven durability • Heavy-duty 3" (76 mm) hot-dipped galvanized steel
track and 10 ball-bearing, long-stem rollers
• Dual thermal break and joint seal between internal . Additional center hinges reduce overall door section
and external skins minimize air infiltration and provides loads
l
the highest door system thermal efficiency in the industry . hinge hinge sensing edge stops/reverses door upon
• Specially designed track and heavy-duty fixtures contact with an obstruction
ensure a tight and reliable fit
• Two coats of baked-on polyester paint provide a Built to last
durable finish • 10-year* limited warranty against panel delamination
• Unique design allows on-site door customization for of foam and steel skins
quick and precise installation, replacement or repairs . 1-year limited warranty on door
• 3-year/20,000 cycle limited warranty on door and
High-usage components for special applications
promotes long life and low maintenance operator system
*8-year warranty on model 598
• Heavy-duty, precision ground headplate bearings for
enhanced counterbalance performance Cover image:
• Oil-tempered, heavy-duty helical wound, torsion Model592,Ribbed panel,custom paint,finish 25"x12"oval liter
springs, available in up to 100,000 cycles for extra Image above:
long life Model591,Ribbed panel,gray paint finish,25"x12"oval lites
2
MODELs 591/592/593/594/596/598/599/850
SECTION PROFILES
Model 850 Model 596 Models 591 / 592 / 599*
Dual Thermal Break
and Joint Seal
Two 1"continous
steel strips
20 Ga.Exterior Steel, .015'Exterior Steel
Textured Weatherstrip
Weatherstrip
3" Panel Thickness Z" Panel Thickness 2"Panel Thickness Models 592,599
1 5/8"Panel Thickness Model 591
*Flush panel only
Model 593 Model 594 Model 598
W015"Exterior Steel 012"Exterior Steel 012"Exterior Steel
We3therstnp Weatherstrip Weatherstrip
13/8"Panel Thickness 1 3/8"Panel Thickness 1"Panel Thickness
JOINT "PROFILES
Model 850 Models 596 / 599 Models 591 / 592
Hot-Dipped Hot-Dipped
Galvanized Galvanized
GRADUATED Roll-Formed Steel Roll-Formed Steel
END HINGE CFC-Free CFC-Free
Polyurethane Core Polyurethane
O Care
PVC PVC
Hinge Hinge ,l
.015"THICK RIBBED
EXTERIOR STEEL SKIN
ntegml Steel Integral Steel
Hinge Mounting Hinge Mounting
POLYURETHANE StripStrip
INSULATION
Models 593 / 594 Model 598
Hot-Dipped Hot-Dipped
Galvanized Galvanized
Roll-Formed Steel Roll-Formed Steel
CFC-Free CFC-Free
Polyurethane Intermediate Polyurethane Core
Core EPDM
Rubber Seal ?°
Hinge Hinge
Hot Melt Hot Melt
Integral Steel Integral Steel
Hinge Mounting Hinge Mounting
Strip Stop
www.overheaddoor.com 3
THERMACORE° DOOR SYSTEMS ir INSULATED SECTIONAL • •
Panel and glazing options for models 591 / 592 / 593 / 598
Double Thermal Acrylic Aluminum Sash Section Insulated DSB
(25" w by 12" h) with DSB glazing* (24"w by 7" h)
Clear Long**(44" w by 15" h)
Ribbed panel * Not available on Model 598
**Not available on doors wider than 20'2". Not available on Model 591.
Panel and glazing options for model 594
Mmmm M ---
Insulated DSB Aluminum Sash Section
(20.75"w by 15" h) with DSB glazing
MMM �
MMMM
Raised panel
Panel and glazing options for models 596 / 599
W i
Double Thermal Acrylic Aluminum Sash Section Insulated DSB
(25"w by 12" h) with DSB glazing (24"w by 7" h)
Flush anal Clear Long*(44" w by 15" h)
p *Not available on doors wider than 20'2".
Panel and glazing options for model 850
Large Lites(25" w by 13" h)* Insulated (24" w by 6" h)
Both lites available with insulated glass, insulated tempered glass or multi-wall polycarbonate clear
glazing(brown,white or clear). Black frame is standard.
*Color matched frames are available.
Microgroove, texture Contact your local Overhead Door'M Distributor or visit our Architects Corner at
www.overheaddoor.com/architects-corner for specific glazing detail.
4
specifications for THERMACOREO DOOR SYSTEMS __
Advanced Extra Heavy duty Medium duty Light duty
Performance heavy duty
Model 850 596 599 592 591 593 594 598
Nominal thickness 3'' (76.2 mm) 2"(51 mm) 2'' (51 mm) 2"(51 mm) 1 5/8"(51 mm) 1 3/8"(51 mm) 1 3/8''(51 mm) 1"(25 mm)
R-valuer(K mz/W) 26(4.58) 17.40(3.06) 17.50(3.09) 17.50(3.09) 14.86(2.63) 12.76(2.26) 12.76(2.26) 9.31(1.64)
U-valuez(W/K mz) .038(.220) .057(.327) .057(.327) .057(.327) .067(.380) .078(.443) .078(.443) .107(.608)
Air infiltration at .21 cfm/ftz .13 cfm/ftz .13 cfm/ftz .13 cfm/ftz .08 cfm/ftz .15 cfm/ftz .15 cfm/ftz .46 cfm/ftz
25 mph(at 40 kmp/h) (3.83 m3/hr/m2) (2.37 m3/hr/m2) (2.37 m3/hr/m2) (2.37 m3/hr/m2) (1.46 m3/hr/m2) (2.74 m3/hr/m2) (2.74 m3/hr/m2) (8.40 m3/hr/m2)
Thermal break Dual thermal PVC PVC PVC PVC Hot melt Hot melt Hot melt
brake&joint seal
STC°rating class 22 class 26 N/A class 26 N/A N/A N/A N/A
Exterior steel .015" 20-ga galvanized .015" .015" .015" .015" .012" .012"
(.38 mm) (.91 mm) (.38 mm) (.38 mm) (.38 mm) (.38 mm) (.30 mm) (.30 mm)
Exterior surface microgroove, flush flush ribbed ribbed ribbed raised panel ribbed
texture
Standard end stiles 18-gauge 16-gauge 16-gauge 16-gauge 16-gauge 20-gauge 20-gauge 20-gauge
Standard max.width3 40'2" 36'2" 40'2" 40'2" 352" 20'2" 20'2" 162"
(12,243 mm) (11,024 mm) (12,243 mm) (12,243 mm) (10,719 mm) (6,147 mm) (6,147 mm) (4,928 mm)
Standard max.height3 24'1" 24'1" 32'1" 32'1" 24'1" 16'1" 16'1" 14'1"
(7,341 mm) (7,341 mm) (9,779 mm) (9,779 mm) (7,341 mm) (4,902 mm) (4,902 mm) (4,293 mm)
White,Almond,
White,Tan, White,Tan, White,Tan, White,Tan, White,Tan, Sandstone,
Exterior color Almond, Gray, White Gray, Gray, Gray, Hunter Green, White
Industrial Brown Industrial Brown Industrial Brown Industrial Brown Industrial Brown Chestnut Brown,
Terra Bronze,
Desert Tan
Trinar White Trinar White Trinar White Trinar White
Optional colors Trinar Brown Trinar Brown Trinar Brown Trinar Brown
Trinar Beige Trinar Beige Trinar Beige Trinar Beige
Available options f• • ' o DOOR
Electric operator
Chain hoist
Thermal glazing
Four-section pass
door
High-usage
components
Posi-tension drums
Safety bottom fixture
Bottom sensing edge
EPDMs rubber header
seal
Aluminum full view
sash section
Tumbler keyed lock
Exhaust ports
Overhead Door Corporation uses a calculated 3 Maximum door size is dependent on weight.Doors are not available to Ethylene propylene diene monomer rubber.Used in the
door section R-value for our insulated doors. the maximum height at the maximum width. automotive industry for its superior durability and wearability.
2 U-value is a measure of the flow of heat through an 4 Sound Transmission Class(STC):how well the door reduces airborne
insulating or building material;the lower the U-value, sound.The higher the number the better sound reduction.
the better the insulating ability.U-value is the inverse
of R-value.
5
ADVANCE PERFORMANCE THERMACORE® DOORS • 1
s 1
MODEL 850
For applications where climate control, durability and ease of maintenance are primary concerns
i ■ ■ ■ ■ U If IF Ir ■ —�
w ■ ■ ■ ul i t
Standard features at a glance Exterior color options
Panel thickness 3" ❑ . ❑ .
Standard maximum widths 40'2"(1(12,25253 mm)
Standard maximum heights 24'1"(7,341 mm) White Brown Almond Taupe
Exterior steel .015" (.38 mm)
Exterior surface Microgroove,textured
R-value' 26(4.58 K m2/W) Options
U-value2 .038(.22 W/K mz)
Installed U-factor3 .14 Btu/hr*ftz*F°(.80 W/m2) Large thermal lites(25" w x 13" h);black frame standard;optional
STC rating" Class 22 color matched frame available
Air infiltration: Glass:insulated tempered,multi-wall
at 25 mph(40 kmph) .21 cfm/ft2(5.95 m3/hr/m2) polycarbonate in clear,bronze,or white
IECC® Meets requirements for U-factor and air High-cycle springs
infiltration High-usage components
Thermal break 1-3/4" wide PVC thermal break; Electric operator
PVC thermal break on end stiles
Chain hoist
Standard springs 10,000 cycle
Cable failure device
Joint profile Dual barrier tongue-in-groovemeeting
rail consists of the industry's first dual Exhaust ports
tongue and groove joint profile(patents
pending)
Perimeter protection Header seal
Bottom weather seal;rigid PVC retainer
with dual-durometer PVC bulb seal
Enhanced thermal performance jamb
R-value is a measure of thermal efficiency.The higher the R-value the greater the insulating
seal(option) properties of the door.Overhead Door Corporation uses a calculated door curtain R-value
EPDM outer bulb seal recommended for for our insulated doors.
2 U-value is a measure of the flow of heat through an insulating or building material;the lower
more extreme environments(option)
the U-value,the better the insulating ability.U-value is the inverse of R-value.
Continuous hinge strip Two continuous steel strips at top and 3 A tested value of actual energy loss-whether heat or cold-of an installed door,wall,or
window assembly.The lower the number the lower the energy loss and therefore the better
bottom of section for hinge attachment the thermal performance.For best U-factor,choose finish and color with high solar
reflectance(bright colors).
Exterior color White,Brown,Almond,Taupe ^ Sound Transmission Class(STC):how well the door reduces airborne sound.The higher the
number the better sound reduction.
Interior color White s Maximum door size is dependent on weight.Doors are not available to the maximum height
at the maximum width.
Limited warranty 10-year delamination
1-year material and workmanship For drawings and specifications please visit our website,
3-year/20,000 cycle door and operator www.overheaddoor.com/architects-corner.
system(material and workmanship)
6
MODELS 596 EXTRA-HEAVY-DUTY THERMACORE® DOORS
MODELS 596
IrnFor extra-heavy-duty applications where thermal efficiency and sound suppression are desirable
Q
■ � Imo■ �° u�
Exterior color options
MEN
White Industrial Gray Tan
Brown
Standard features at a glance Options
Panel thickness 2" (51 mm) Thermal glazing
Standard maximum width' 36'2" (11,024 mm) Aluminum sash section available to 24'2" (7,366 mm)wide
Standard maximum height° 241" (7,341 mm) Four-section pass door
Exterior steel 20-gauge galvanized High-usage components
Exterior surface Flush,textured Wind load options
R-value' 17.40(3.06 K M2/W) Electric operator
U-value2 .057(.327 W/K mz) Chain hoist
STC Rating' Class 26 Posi-Tension®drums
Thermal break PVC Safety bottom fixtures
Air infiltration: Bottom-sensing edge
at 25 mph(40 kmph) .13 cfm/ft2(2.37 m3/hr/m2) Flexible jamb,header seal
IECC® Meets requirements for U-factor and Exhaust ports
air infiltration
Standard springs 10,000 cycle
Exterior color White,Gray, Industrial Brown,Tan
Interior color White
Limited warranty 10-year delamination R-value is a measure of thermal efficiency.The higher the R-value the greater the insulating
1-year door properties of the door.Overhead Door Corporation uses a calculated door curtain R-value
for our insulated doors.
3-year/20,000 cycle door 2 U-value is a measure of the flow of heat through an insulating or building material;the lower
and operator system the U-value,the better the insulating ability.U-value is the inverse of R-value.
3 Sound Transmission Class(STC):how well the door reduces airborne sound.The higher the
number the better sound reduction.
^ Maximum door size is dependent on weight.Doors are not available to the maximum height
at the maximum width.
For drawings and specifications please visit our website,
www.overheaddoor.com/architects-corner.
overheaddoor.com 7
HEAVY-DUTY THERMACORE® DOORS MODELS 592/599
MODELS 592/599
For applications that demand high level of thermal efficiency and wind resistance
I FL
- � N14 t �
Exterior color options for Model 592 Exterior color options for Model 599
MEN
White Industrial Gray Tan White
Brown
Optional:Trinar White,Trinar Beige and Trinar Brown
Standard features at a glance Options
Panel thickness 2" (51 mm) Thermal glazing
Standard maximum width' 40'2"(12,243 mm) Aluminum sash section available to 24'2" (7,366 mm)wide
Standard maximum height' 32'1"(9,779 mm) High-usage components
Exterior steel .015" (.38 mm)gals. Wind load options
Exterior surface Model 592—Ribbed,textured Four-section pass door
Model 599—Flush,textured Chain hoist
R-value' 17.50(3.09 K m2/W) Posi-Tension°drums
U-value2 .057(.324 W/K mz) Safety bottom fixtures
Air infiltration: Bottom-sensing edge
at 25 mph(40 kmph) .13 cfm/ft2(2.37 m3/hr/m2)
Flexible jamb,header seal
IECC® Meets requirements for U-factor and
air infiltration Exhaust ports
Thermal break PVC Electric operator
Standard springs 10,000 cycle
Exterior color Model 592:White,Tan,Gray,
Industrial Brown,plus optional Trinar R-value is a measure of thermal efficiency.The higher the R-value the greater the insulating
properties of the door.Overhead Door Corporation uses a calculated door section R-value
colors:White,Brown and Beige for our insulated doors.
2 U-value is a measure of the flow of heat through an insulating or building material;the lower
Model 599:White only
the U-value,the better the insulating ability.U-value is the inverse of R-value.
Interior COOP White 3 Maximum door size is dependent on weight.Doors are not available to the maximum height
at the maximum width.
Limited warranty 10-year delamination
1-year door For drawings and specifications please visit our website,
3-year/20,000 cycle door and www.overheaddoor.com/architects-corner.
operator system
8
MODELHEAVY-DUTY THERMACORE® DOORS
MODEL 591
For heavy-duty applications that require high thermal efficiency and durability
CD
Exterior color options
MEN
White Industrial Gray Tan
Brown
Optional:Trinar White,Trinar Beige and Trinar Brown
Standard features at a glance Options
Panel thickness 1 5/8" (41 mm) Thermal glazing
Standard maximum width' 35'2" (10,719 mm) Aluminum sash section available to 24'2" (7,366 mm)wide
Standard maximum height' 24'1" (7,341 mm) Four-section pass door
Exterior steel .015" (.38 mm)galvanized High-usage components
Exterior surface Ribbed,textured Wind load options
R-value' 14.86(2.63 K mz/VM Electric operator
U-value2 .067(.380 W/K m2) Chain hoist
Thermal break PVC Posi-Tension®drums
Air infiltration: Safety bottom fixtures
at 25 mph(40 kmph) .08 cfm/ft2(1.46 m3/hr/m2) Bottom-sensing edge
IECCc Meets requirements for U-factor and Flexible jamb,header seal
air infiltration
Standard springs 10,000 cycle Exhaust ports
Exterior color White,Tan,Gray, Industrial Brown
plus optional Trinar colors:White,
Brown and Beige R-value is a measure of thermal efficiency.The higher the R-value the greater the insulating
properties of the door.Overhead Door Corporation uses a calculated door section R-value
Interior color White for our insulated doors.
2 U-value is a measure of the flow of heat through an insulating or building material;the lower
Limited warranty 10-year delamination the U-value,the better the insulating ability.U-value is the inverse of R-value.
1-year door 3 Maximum door size is dependent on weight.Doors are not available to the maximum height
3-year/20,000 cycle door at the maximum width.
and operator system
For drawings and specifications please visit our website,
www.overheaddoor.com/architects-corner.
overheaddoor.com 9
MEDIUM-DUTY THERMACORE® DOORS MODELS 593/594
MODELS 593/594
Offers excellent thermal efficiency to fit a broad range of medium-duty applications P.
711
ll � _ ! !
rim
:-
�
T � I
Exterior color options for Model 593 Exterior color options for Model 594
ME " MEN
White Industrial Gray Tan White Almond Sandstone Desert Hunter Brown Terra
Brown Tan Green Bronze
Optional:Trinar White,Trinar Beige and Trinar Brown Optional:Trinar White,Trinar Beige and Trinar Brown
Standard features at a glance Options
Panel thickness 1 3/8" (35 mm) Thermal glazing
Standard maximum width3 20'2" (6,147 mm) Aluminum sash section available
16'1" (4,902 mm) High-usage components*
Standard maximum height3 24'1" (7,341 mm)
Wind load options
Exterior steel Model 593: .015" (.38 mm)galy.
Model 594: .012" (.3 mm)galv. Chain hoist
Exterior surface Model 593-Ribbed,textured Posi-Tension®drums
Model 594-Raised-panel,textured Safety bottom fixtures
R-value' 12.76(2.26 K m2/W) Bottom-sensing edge
U-value2 .078(.443 W/K m2) Flexible jamb,header seal
Air infiltration: Exhaust ports
at 25 mph(40 kmph) .15 cfm/ft2(2.7 m3/hr/m2)
IECC® Meets requirements for U-factor
Thermal break Hot melt R-value is a measure of thermal efficiency.The higher the R-value the greater the insulating
properties of the door.Overhead Door Corporation uses a calculated door section R-value
Standard springs 10,000 cycle for our vinsulated doors.
2 U-value is a measure of the flow of heat through an insulating or building material;the lower
Interior color White the U-value,the better the insulating ability.U-value is the inverse of R-value.
s Maximum door size is dependent on weight.Doors are not available to the maximum height
Limited warranty 10-year delamination at the maximum width.
1-year door
3-year/20,000 cycle door and For drawings and specifications please visit our website,
operator system www.overheaddoor.com/architects-corner.
10
• ' : LIGHT-DUTY THERMACORE® DOORS
MODEL 598
An economical choice for lighter-duty applications where thermal protection is important
SERVICE
Exterior color options
White
Standard features at a glance Options
Panel thickness 1" (25.4 mm) Thermal glazing
Standard maximum width' 16'2" (4,928 mm) High cycle springs
Standard maximum height' 14'1" (4,293 mm) Wind load options
Exterior steel .012" (.3 mm)galvanized Electric operator
Exterior surface Ribbed,textured Chain hoist
R-value' 9.31 (1.64 K m2/W) Posi-Tension®drums
U-value2 .107(.608 W/K m2) Safety bottom fixture
Air infiltration: Flexible jamb,header seal
at 25 mph(40 kmph) .15 Cfm/ft2(2.7 m'/hr/m 2)
Thermal break Hot melt
Standard springs 10,000 cycle
Exterior color White
Interior color White R-value is a measure of thermal efficiency.The higher the R-value the greater the insulating
properties of the door.Overhead Door Corporation uses a calculated door section R-value
Limited warranty 8-year delamination for our insulated doors.
1-year door 2 U-value is a measure of the flow of heat through an insulating or building material;the lower
3- ear/20,000 cycle door s the U-value,the better the insulating ability.U-value is the inverse of R-value.
Y Y Maximum door size is dependent on weight.Doors are not available to the maximum height
and operator system at the maximum width.
For drawings and specifications please visit our website,
www.overheaddoor.com/architects-corner.
overheaddoor.com 11
THERMACORE® DOOR SYSTEMS INSULATED SECTIONAL • •
Track detail
Any of the following track configurations can be selected for all Thermacore° models.
O.H.=Opening height L.C.=Lift clearance D.H.=Door height
StandardPERStandard Full vertical track
Backroom=Opening Height+18" Backroom=Opening Height-Lift Clearance+26" 1 gg
Hari-ontal
Track
�2 ® ® Support —
�io
Horizontal Track Assembly Horizontal T Headplate Horizontal � o
Headplate Support Assembly
$ Headplate
Breakaway Track Assembly Breakaway,
_ Track
Assembly —
Vertical Track Assembly
Vertical Track CD
o _ 'Jertkal Track Assembly o Assembly
o
UL[ O U
amb
Brackets
Jamb Brackets Jamb Brackets
2"(51 mm) Track[15"(381 mm)radius] 2"(51 mm) Track[15"(381 mm)radius] 2"(51 mm) Track
Door height Centerline of shaft Minimum headroom Door height Centerline of shaft Minimum headroom Centerline of shaft Minimum headroom
Thru 12'0"(3,658 mm) O.H.+11 5/8"(295 mm) 141/4"(361 mm) Thm 12'0"(3,658 mm
J O.H.+L.C.+5 5/8"(143 mm) L.C.+8 3/4"(222 mm) Thm 11'0"(3,353 mmJ O.H.+O.H.+3/8"(10 mmJ O.H.+101/4"(260 mm)
Thm 16'0"(4,877 mm) O.H.+12 5/8"(321 mmJ 201/2"(521 mm) Thru 16'0"(4,877 mm O.H.+L.C.+5 5/8"(143 mm) L.C.+11 1/4"(286 mm) Thm ru 16'0"(4,811 mm) O.H.+O.H.+3/8"(10 mm) O.H.+101/4"(260 mm)
3"(76 mm) Track[15"(381 mm)radius]Single shaft 3"(76 mm) Track[15"(381 mm)radius]Single shaft , 3"(76 mm) Track
Thm 18'0"(5,486 mm) O.H.+14 5/8"(372 ni 18"(457 ni Thm 22'0"(6,706 mm) O.H.+LG+6 5/8"(168 mm) L.C.+11 1/2"(292 mm) Thm 18'0"(5,486 mm)I O.H.+O.H.+3/8"(10 mm) O.H.+101/4"(260 mm)
Thru 32'0"(9,754 mm) O.H.+16 7/8'(429 mmJ 21 1/2"(546 mm) Thru 32'0"(9,754 mm)O.H.+LC.+6 5/8'(168 mm) LC.+12 1/4"(311 mm)
Low headroom • headroom track
Backroom=0 enin Hei ht+24" Backroom-Opening Height+24"
® — Hcrizontel
Aso
ti Horizontal Track Horizontal �� Horizontal Track Assembly Support
FHAssembly Track
Support
ssembly o — �VerticalTrackAssembly
Er
Jamb Brack ets
2"(51 mm) Track[15"(381 mm)radius] 2"(51 mm) Track[15"(381 mm)radius]
Door height Centerline of shaft Minimum headroom Door height Centerline of shaft Minimum headroom
Thru 12'0"(3,658 mm) D.H.+8"(203 mm) 11 3/4"(299 mm) Thru 12'0"(3,658 mm) O.H.+2"(51 mm) 7 1/2"(191 mm)
Thru 16'0"(4,877 mir D.H.+8"(203 mm) 12 1/2"(318 mm) Thru 16'0"(4,866 mm) O.H.2"(51 mm) 8"(203 mm)
3"(76 mm) Track[15"(381 mm)radius] 3"(76 mm) Track 115"(381 mm)radius]
Thru 12'0"(3,658 mm) D.H.+9"(229 mm) 13"(330 mm) Thru 18'0"(5,486 mm)I O.H.6 3/4"(171 mm)19 3/4"(248 mm)
Thru 32'0"(5,486 mm) D.H.+9"(229 mm) 13 3/4"(349 mm)
12
MODELS 591/592/593/594/596/598/599/850
Framing and pad detail
Framing and pad details for common installation of Thermacore® in steel, wood, concrete and masonry jambs
are provided here. If you require additional information or have special project requirements, visit our Architects
Corner at www.overheaddoor.com/architects-corner or consult with our Applications Engineering Group or your local
Overhead Door" distributor.
Steel jambs . .. jambs Concrete/masonry jambs
Opening Width Opening Width Opening Width
Shaft support
8 Pad Locat Centerline —brackets mounted
a oca4on
on'
of Shaft o concretelmasonry
Centerline F1 �
of Shaft
Centerline
Of Shaft
6"W x 8"H
Steel Pad for
Spring Anchor Header
Header Bracket Mounting
72"x 6"x 12" Centerline of Door
Centerline of Door Centerline of Door Wood Pad for Square and)PIurnb
Square and Plumb S u re and Plumb Spring Anchor
q Bracket Mounting
All bolt heads countersunk _
flush with face ofjambs Concrete/Masonr Jamb o
oSteel Jamb for wood jambs only)o
Wood Jamb
Pad Location for additional shaft support brackets Pad Location for additional shaft support brackets
for dears over 18'3"wide
Req'd Sideroom Opening Width Sideroom x 2 Req'd Sideroom Opening Width Sideroom x 2 Req'd Sideroom Opening Width Sideroom x 2
iEEI \\\ 17� V7
N �=
1 Door Door 1'4 Door
Req'd Sideroom Opening Width Sideraom x 2 Req'd Sideroom Opening Width Sideroom x 2 Req'd Sideroom Opening Width Sideroom x 2
-1 MV FT
1 —Door Door Door
Minimum required sideroom Minimum required sideroom Minimum required sideroom
Track type 2"Track(51 mm) 3"Track(76 mm) Track type 2"Track(51 mm) 3"Track(76 mm) Track type 2"Track(51 mm) 3"Track(76 mm)
Standard lift 5"(127 ni 7"(178 ni Standard lift 5"(127 ni 7"(178 ni Standard lift 5"(127 ni 7"(178 ni
Low headroom 9"(229 ri 10"(254 mm) Low headroom 8"(203 mm) 9"(229 mm) Low headroom 9"(229 mm) 10"(254 mm)
Lift clearance 5"(127 ni 7"(178 mm) Lift clearance 5"(127 mm) 7"(178 mm) Lift clearance 5"(127 mm) 7"(178 mm)
Full vertical 5"(127 mm) 7"(178 mm) Full vertical 5"(127 mm) 7"(178 mm) Full vertical 5"(127 mm) 7"(178 mm)
overheaddoor.com 13
THERMACORE° DOOR SYSTEMS INSULATED SECTIONAL • •
Electric operators
We offer a broad line of electric operators to suit new construction and retrofit applications, as well as unusual
or special requirements. In order to improve safety and enhance door and motor life, industry quality assurance
guidelines recommend the choice of a single manufacturer for both door and operator applications.
We are one of the only national manufacturers to offer a full line of commercial and industrial doors and operators
specifically designed for integral applications.
Model RHX° Mr
Operator control options
Model RHX° is a heavy
i Push-button, key or combination stations;
duty commercial operator
designed to operate doors r 1 surface-or flush-mounted for interior and/or
exterior locations
up to 24' (7,315 mm) in Rix 5 I
height and 3,696 pounds ? Vehicle detectors, key card reader, photocell
(1,676 kg).Available as and door timer controls
either a trolley, sidemount Treadle or pull switch stations
• Telephone entry and coded keyboard stations
or centermount.
• Universal programmable door timer
• Commercial light package
• Radio control systems(24 VAC or 120 VAC)
• Explosion and dust ignition-proof systems
Model RSX® Electric operator selection guide
Model RSX®is a standard
o -0 � a
duty commercial operator v m _ v 2
o � m v
designed to operate doors v o L 3 m T _ -
x `o x `o a T o a 'o
up to 24' (7,315 mm) in height =z 2-0 2-0 a 3 a U W 2
and 1,620 pounds (735 kg). 1/2 HP, 24'* 3,696 T,S,
® 3/4 HP (71315 Ibs C
It offers unique features like RHX 1 HP, mm) (1,676 •
3HP kg)
LimitLock®, SuperBelt'" and k'
1/2 HP, 24' 1620 T,S,
16 digit menu setup. RSk' 3/4HP (7,315 (7,35 • • • • C
1 HP mm) kg)
1/2 HP 14, 620 T,S
RMX (4,267 (281 •
mm) kg)
Mounting options:
T=Trolley S=Side mount C=Center mount
Model RMX° RHX hoist operators may be used on doors tallerthan 24'.An optional extended limit
kit may be required depending on the application.
Model RMX°is our newest,
most advanced medium- Safety recommendations
duty operator. It is designed
for quicker installation and We strongly recommend the use of a primary safety
hassle-free operation and device as defined by UL325 2010.A primary safety
operates doors up to 14' _ device can be approved monitored photo-eyes or an
(4,267 mm) in height and approved monitored sensing edge. If a primary safety
620 pounds(282 kg). It is device is not installed, a constant contact control
available as a trolley-type or switch must be used to close the door. Contact your
side-mounted unit. Overhead DoorTM Distributor for more information.
14
MODELs
• • • • • • • : • • • 1
Mounting details
Trolley-type (Drawbar) Side mount type (Jackshaft) Center mount type/Jackshaft
RMX°, RSX°,RHX° RMX°, RSX°, RHX° RSX@, RHX
Trolley-type (Drawbar) operators Side-mounted (Jackshaft) RMX®, Center-mounted (Jackshaft)
feature a power unit mounted RSX°, and RHX°operators feature operators feature a power unit on
between, above and to the rear of a power unit mounted on the the front wall above the door
the horizontal tracks.The drawbar inside front wall and connected opening. No additional backroom
drive provides positive control of to the crosshead shaft, with an is required.Available on models
the door at all times, making this adjustable coupling or drive chain RSX®and RHX°.
operator the preferred choice and sprockets.
whenever possible. Maximum
door width is 20' per drawbar.
Door width over 20' requires dual
drawbar installation.Available on
Models RMX°, RSX°and RHX°.
a —
i
Centerline of Shaft — Centerline
of Shaft
Centerline of Door
Edge of Opening
VD-r
Track
A Edge of Opening g"
Track
Minimum headroom requirements "A"dimension-minimum(sidercmorn) Minimum headroom requi
RMX Track requirements+4 112"(114 mm) 2"track(51 mm) 3"track(76 mm) RSX® Track requirements+14"(356 mm)
RSX® Track requirements+5"(127 mm) RMX® 18 1/2"(470 mm) 19 1/2"(495 mm) RHX® Track requirements+23 5/8"(600 mm)
RHX® Track requirements+5"(127 mm) RSX® 21"(533 mm) 22"(559 mm)
RHX® 21"(533 mm) 22"(559 mm)
Depth
RMX® Door height+4'0"(1,219 mm)
RSX Door height+4'0"(1,219 mm)
RHX Door height+4'10"(1,473 mm)
overheaddoor.com 15
yM fV
_ r
r
® 1s-t help TO"
jet e - . ..
r
4 �
The original, innovative choice for unequalled quality and service.
Overhead Door Corporation pioneered the sectional garage door industry, inventing the first sectional garage
door in 1921 and the first electric door operator in 1926. Today, we continue to be the industry leader through
the strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring
a legacy of quality, expertise and integrity. That's why design and construction professionals specify Overhead
Door— products more often than any other brand. Our family of over 400 Overhead Door'M Distributors across
the U.S. and Canada not only share our name and logo, but also our commitment to excellence.
mimfflw
Dpp�
INDUSTRY LEADING
COMMERCIAL&INDUSTRIAL SOLUTIONS
2501 S. State Hwy. 121 Bus., Suite 00 Lewisville,TX 75067
• • ...
C2021 Overhead Door Corporation.Overhead Door is a trademark - -and the Red Ribbon logo are registered trademarksof Overhead Door Corporation.
All other trademarks are property of their rightful owners.Consistent with our policy of continuing product
we reserve the right to change product specifications without notice or obligation. 1